Long Drains
A long drain, also called a linear or channel drain, collects water along one straight grate instead of at a single point.
Delivering to
Delivery dates appear once we know the postcode. A full address is only needed at checkout.
No collection point yet. That appears once there is something in the cart, because which stores can fill an order depends on what is in it.
Finding nearby stores…
Searching…
No saved addresses yet.
A long drain, also called a linear or channel drain, collects water along one straight grate instead of at a single point.
A long drain, also called a linear or channel drain, collects water along one straight grate instead of at a single point. That lets the floor fall in one direction towards it, which is why long drains are a common choice for walk-in showers, wet rooms, balconies, pool surrounds and outdoor paving.
Every grate in this range is from Lauxes, grouped into grates and channels up to 3.0m and up to 5.6m, plus Long Drain Accessories. NXT linear floor grates come as NXT14, NXT21, NXT26 and NXT35, where the number is the depth in millimetres. The shallow NXT14 suits tight floor build-ups, while NXT35 is aimed at outdoor areas. Tile insert grates hold a strip of your tile so the drain blends into the floor. The number is the channel depth, not the tile thickness: STI21 is 21mm deep and takes tiles up to 10mm, STI26 is 26mm deep and takes tiles up to 11mm, and TIP35 takes tiles up to 20mm thick. The Standard Floor Grate SFG is 70mm wide, and SW109, SW128 and SWT128 are replacement tops for existing storm water channels.
Lauxes grates are anodised aluminium and can be trimmed on site. The NXT, STI, TIP35 and SFG grates come with a matching 40mm, 50mm, 72mm or 80mm waste outlet, while the storm water covers are tops only. Accessories include thin, thick and internal end caps, 90 and 180 degree joiners, spare waste outlets and hole saws.
Common Questions
Match the depth to how much room the floor build-up allows. NXT14 is only 14mm deep, about the thickness of tile and glue, and needs no bedding, which Lauxes says suits balconies. STI21 is the thinnest tile insert grate and takes tiles up to 10mm, while STI26 is 26mm deep and takes tiles up to 11mm. NXT35 and TIP35 are 35mm deep for outdoor areas, and TIP35 takes tiles up to 20mm thick.
No. SW109, SW128 and SWT128 are top covers only, made as replacement tops for existing storm water linear drainage in driveways and alfresco areas. Check the width of your existing channel before ordering. SW109 and SW128 come in lengths from 0.6m to 3.0m, and the SWT128 tile insert version from 0.6m to 5.6m, holding tiles up to 13mm thick.
End caps close each end of a Lauxes grate. Thin and thick end caps sit on either side of the grate, and internal end caps finish the tiled insert tray on STI and TIP35 grates. For runs longer than 5.6m or drains that turn a corner, 180 degree joiners continue a straight line and 90 degree joiners turn it. Choose caps and joiners to match your grate depth.
Talk to the team
Get in touch for expert advice, samples and trade pricing.
Added to cart
View cart