Description
Thin end caps finish the open ends of a Lauxes grate. Each size matches a grate depth and width, from 14 x 100 mm to 35 x 100 mm, plus a 23 x 70 mm cap for the SFG23. Lauxes supplies them as a pair. See the Lauxes range.
Each Lauxes grate on Multifors comes with one matching waste outlet and two matching end caps (thin, or thick where you choose them). Buy thin caps here as spares or replacements, or for the extra ends made when one length is cut into two grates.
Technical Specifications
| EC14 | 14 x 100 mm |
|---|---|
| EC21 | 21 x 100 mm |
| EC23 | 23 x 70 mm |
| EC26 | 26 x 100 mm |
| EC35 | 35 x 100 mm |
| Colours | Silver, Midnight, Gold, Brushed Nickel and Gunmetal; Copper in EC14, EC21 and EC26 (2026 catalogue; the combined tech sheet lists five) |
| Tech sheet | Thin end cap tech sheet (PDF) |
What It Fits
- EC14: NXT14
- EC21: NXT21 and STI21
- EC23: SFG23 (70 mm wide)
- EC26: NXT26 and STI26
- EC35: NXT35 and TIP35
How It Is Used
A licensed plumber installs Lauxes grates. What the Lauxes installation guide (PDF) says, in brief (not DIY instructions):
- Allow for the cap — the Lauxes guide cuts the bottom tray 3 mm shorter than the finished length for thin end caps.
- Silicone and insert — neutral cure silicone on the end of the grate, cap inserted, then a bead on the outside of the tray.
Important Notes
- Lauxes recommends end caps are not covered by or installed behind wall tiles.
- Lauxes says no metal debris is to be left on or in contact with the grate, so clear cutting swarf straight away.
- Lauxes says its grates and accessories hold WaterMark certification, and that WaterMark products are legally required to be installed by a licensed plumber; your plumber will confirm local requirements.
- Lauxes notes colours may vary slightly.
- For any problem with an item bought here, contact Multifors first.
Frequently Asked Questions
Which thin end cap fits my Lauxes grate?
Match the cap to the grate’s depth: EC14 for NXT14, EC21 for NXT21 and STI21, EC23 for the SFG23 (70 mm wide), EC26 for NXT26 and STI26, and EC35 for NXT35 and TIP35.
How much shorter is the tray cut for thin end caps?
The Lauxes installation guide cuts the bottom tray 3 mm shorter than the finished length for thin end caps.


























