Description
Stellmann Non-Slip Clear PRO is the clear non-slip system Stellmann installers have laid across more than 4,000 square metres of a single Docklands headquarters, from bathroom tiles to a loading dock ramp, and on ceramic, granite and concrete platforms at over 15 Brisbane busway stations. The Trades PRO Starter Bundle brings the same water-based two-pack polyurethane to site in 30 and 60 square metre quantities, with the primer, the cleaner and every application tool in the box.
Because the coating is transparent and satin, a treated hotel lobby, restaurant terrace or shopping-centre toilet block looks the way the designer intended while meeting the wet pendulum classifications in AS 4586:2013. Post-treatment laboratory tests on Stellmann projects have recorded P5 on transport platforms, pedestrian bridges and commercial kitchens, and P4 on restaurant counters, glass walkways and retail lobbies.
What’s in the Bundle
Every Trades PRO Starter Bundle ships as a complete kit: the coating, the primer, the cleaner and the application tools, so a crew can arrive on site and start. The 30 square metre bundle contains two 15 square metre kits, and the 60 square metre bundle contains four.
- Non-Slip Clear PRO Part A and Part B in the P3, P4 or P5 rating you select, supplied as 15 square metre kits
- Stellmann Clear Primer and Sealer
- Stellmann Prep and Maintenance Cleaner, 5 litre concentrate
- Stellmann PRO roller sleeves, a roller holder and a U-frame
- Telescopic extension pole and a paint tray
- Prep and protection gear: gloves, drop sheet and sponge
- A Stellmann Cleaning Kit, with Prep and Maintenance Cleaner and a cleaning brush, to hand over to the client
The What’s Included photo in the gallery shows the full lay-out.
Technical Specifications
| Product type | Water-based, dual-component polyurethane non-slip coating |
|---|---|
| Slip ratings | P3, P4 and P5 to AS 4586:2013 (CSIRO, wet pendulum Slider 96 and 55); R11 and R13; DIN EN 16165 Class C barefoot |
| Pack sizes | 30 m² (two 15 m² kits) and 60 m² (four 15 m² kits) at the minimum spreading rate, tools included |
| Mix ratio | 5 : 1 Part A to Part B by weight, mixed mechanically for 5 minutes |
| Spreading rate | 72 g/m² minimum by roller; 80 g/m² sprayed; 85 to 100 g/m² for high traffic |
| Spray dilution | Approx. 4.5% water by weight (7.5% for P5 mix) |
| Pot life | Up to 2 hours |
| Touch dry / trafficable | 60 minutes / 12 hours light pedestrian traffic |
| Full chemical cure | 5 days at 23 °C and 50% RH |
| Application conditions | Air and substrate 15 °C to 35 °C; not in direct sun |
| Heat and chemical resistance | 120 °C dry heat; unaffected by splash and spillage of common solvents |
| Abrasion | Suitable for low, medium and high pedestrian traffic |
| Shelf life | 1 year unopened; protect from frost and direct sun |
Coverage Guide
| Area | Part A | Part B | Total mixed |
|---|---|---|---|
| 5 m² | 300 g | 60 g | 360 g |
| 20 m² | 1,200 g | 240 g | 1,440 g |
| 50 m² | 3,000 g | 600 g | 3,600 g |
Where to Use
- Hotel and office lobbies, food courts and shopping-centre amenities (P3)
- Aged-care and healthcare bathrooms, communal showers and hospital entrances (P3 and P4)
- External walkways, balconies, ramps and pool surrounds (P4)
- Commercial kitchens, loading docks and ramps steeper than 1 in 14 (P5)
- Transport platforms, stairs and pedestrian crossings on tile, granite, concrete or vinyl (P5)
How to Apply
- Test and record — confirm substrate temperature and moisture, relative humidity and dew point before starting.
- Clean and prime — wash with the supplied Prep and Maintenance Cleaner until foaming stops, rinse, dry, then apply the supplied Stellmann Clear Primer diluted 1:1 with water. Coat within 8 hours of priming.
- Mix by weight — 5 : 1 on a precision scale, mechanical mixer for 5 minutes; add 3% P5 particles for a P5 finish.
- Roll or spray — one coat only, sections finished in the same direction; dilute for HVLP spraying.
- Check coverage — weigh what you have used against the area covered and stay at or above 72 g/m².
Full roller and spray procedures, practice-section weights and sign-off checks are in the installation manuals under the Documents tab.
Important Notes
- Do not roll back into curing sections; double layers can dry translucent instead of clear.
- Only Stellmann PRO rollers are covered by the warranty on finish and slip rating; this bundle supplies them.
- Not for permanently immersed surfaces.
- Hardener B contains isocyanates; gloves and the Safety Data Sheet apply.
- Smaller 1.2, 5 and 15 square metre kits are sold as the Stellmann Non-Slip Clear PRO DIY Kit.
