Description
A contemporary, wide-plank engineered European Oak floor with a sophisticated touch. Lenno brings that into Sunstar’s Vogue range, with dark tones and a mid-century modern feel.
A European Oak timber board, 14mm thick, with a light brush matte finish and Tongue & Groove installation. It’s made by Sunstar Flooring, who supply the Vogue range through Multifors.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 220×2200 |
| Wear Layer | 3mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.904 m² |
| Planks per Box | 6 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove installation
- Mid-Century Modern-styled interiors, especially in dark colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Expansion Gaps — Provide a minimum 10mm gap around the entire perimeter including where it meets any vertical obstructions such as walls, fixed furnishings, plumbing penetrations and flooring transitions.
- Tropical Locations — In areas with extreme humidity (e.g., QLD), increase expansion gaps to a minimum of 15mm (see installation in Tropical locations technical note).
- Room Temperature — Maintain consistent room temperature before, during, and after installation.
- Avoid Fixing Skirtings & Scotia: Do not attach skirtings, scotia or trims to the flooring. Floorings natural movement must be allowed for.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
If exposed to direct sunlight for prolonged periods timber can also suffer more serious issues such as minor cracking. The floors are designed for an indoor surface and need to be kept in comfortable living temperatures. Excessive heat, humidity and fluctuations in temperature can cause the floor to distort.
Window protection such as blinds, window tinting or external shading to limit direct sunlight is required to ensure the floor is protected from prolonged direct sun exposure. Use heating and cooling to keep the ambient temperature between 10-30°C and moderate humidity between 35-75% particularly in the more extreme climates of Australia. In Northern Australia take time to understand the settings of your heating and cooling to manage humidity.
It’s always important to keep a floor clean, minor dirt and grit can accelerate the wear of coatings.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
