Description
Engineered European Oak with 1.2mm Veneer, Budget without Compromise Clunes 12mm brings that into Sunstar’s Oak Classics – 12mm Builders range, with dark tones and a french country feel.
A European Oak timber board, 12mm thick, with a light brush matte finish and Droplock installation. It’s made by Sunstar Flooring, who supply the Oak Classics – 12mm Builders range through Multifors.
Behind the colour and finish, 021 Clunes’s real numbers are what determine how it holds up in daily use — a 1.2mm wear layer, a 5 Star acoustic rating and P3 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.888 m² across 8 planks | 30% nested lengths, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 12mm |
|---|---|
| Board Dimensions | 190×1900 |
| Wear Layer | 1.2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Droplock |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.888 m² |
| Planks per Box | 8 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Droplock installation
- French Country-styled interiors, especially in dark colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Clean Surface — Ensure the subfloor is free of debris and structurally sound.
- Leveling — Limit rises and falls to a maximum of 3mm over a 1000mm radius. Smooth imperfections to ensure a maximum 1mm deviation over 250mm area.
- Ventilation & Humidity — Timber subfloors should be well ventilated and meet building regulations for humidity. Concrete subfloors should not exceed 4.8% moisture.
- Floating Floor — Use a 2-3mm foam underlay with a taped moisture barrier, or a 3-10mm rubber underlay as needed.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
When using other cleaning products ensure they are neutral, non-abrasive and don’t use oil-based soaps, or polishes as these will create a residue which can be difficult to remove.
Multi-purpose cleaners should not be used on floors.
In the event of minor damage there’s a few steps that you can take.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
