Description
Construction Multi Guard Floor Protection is built for genuinely high-usage construction and fit-out areas, where lighter protection products can tear or wear through before the job is finished. Its heavy-duty double-laminated woven top layer is specifically engineered to resist tearing, while the 2mm PolyFoam backing absorbs impact and prevents surface abrasion reaching the finished floor underneath.
Being both water and dust resistant matters on a real construction site, where spilled paint, adhesive or general trade dust is a constant risk to an already-finished floor. Manufactured in Australia and 100% recyclable, it’s positioned as a genuinely robust, higher-specification protection product rather than a disposable, single-use sheet.
Technical Specifications
| Thickness | 2.5mm total |
|---|---|
| Roll size | 50m long x 1.2m wide (60m² coverage) |
| Construction | Double laminated woven top + 2mm PolyFoam backing |
| Resistance | Water and dust resistant, tear resistant |
| Origin | Australian made, 100% recyclable |
| Supplier code | 3872 (Yellow) |
Where to Use
- High-usage construction and fit-out areas requiring maximum surface protection
- Protecting finished floors from abrasion, spills and site dust
- Areas subject to heavy foot and equipment traffic during a build
How to Apply
- Clean the floor — remove grit and debris before laying protection.
- Roll out the protection — position across the area needing coverage.
- Join adjoining rolls — overlap or tape joins to maintain full coverage.
- Remove after works — lift the protection once the risk of construction-phase damage has passed.
Important Notes
- This is temporary construction-phase protection, not a permanent flooring underlay.
- 100% recyclable — dispose of responsibly once the job is complete.
A protection product is only as good as its weakest point, and for floor protection on a busy site, that weak point is almost always tearing under repeated wheeled or foot traffic rather than the material failing outright. Construction Multi Guard’s double-laminated woven top layer is specifically engineered against that failure mode, which is why it’s positioned for the highest-usage areas rather than general light-duty protection. That combination of properties is what separates a genuinely heavy-duty protection product from a lighter one repurposed for a job it wasn’t designed for, particularly on sites running weeks of ongoing trade access after flooring goes down. Because it’s supplied in a single continuous 50m roll, larger areas can be covered with fewer joins than a product supplied in shorter lengths, reducing the number of seams where water or debris could otherwise find a way through.
