Description
A herringbone take on Le Parquet’s curated European Oak palette — a geometric pattern with a real sense of history and movement. Bayonne-Herringbone brings that into Sunstar’s Le Parquet Herringbone range, with light tones and a scandinavian feel.
A European Oak timber board, 15mm thick, with a light brush matte finish and Tongue & Groove L+R installation. It’s made by Sunstar Flooring, who supply the Le Parquet Herringbone range through Multifors.
Technical Specifications
| Thickness | 15mm |
|---|---|
| Board Dimensions | 150×750 |
| Wear Layer | 4mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove L+R |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.025 m² |
| Planks per Box | 18 Planks |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove L+R installation
- Scandinavian-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Click System — Products with a click system are glueless and it is not recommend any adhesive is applied to the joins.
- Evaporative Cooling — Should not be used during installation. Expansion gaps may be reduced with care: Adhesive takes up to 30days to fully cure and bond.
- To reduce expansion gaps the following steps must be taken:
- Acclimatized timber in boxes in for 48hours in the room prior to installation.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Window protection such as blinds, window tinting or external shading to limit direct sunlight is required to ensure the floor is protected from prolonged direct sun exposure. Use heating and cooling to keep the ambient temperature between 10-30°C and moderate humidity between 35-75% particularly in the more extreme climates of Australia. In Northern Australia take time to understand the settings of your heating and cooling to manage humidity.
It’s always important to keep a floor clean, minor dirt and grit can accelerate the wear of coatings.
Use mats both inside and outside of doors leading outside to clean shoes and remove debris before it ends up on the floor. Mats should be kept clean. (Where installed in commercial premises it’s recommended foot traffic passes over a 3.0metre mat).
Full care guide available as a downloadable PDF above.
Warranty
- 25 years residential
- 5 years commercial
- Lifetime structural
