Description
Engineered European Oak with 1.2mm Veneer, Budget without Compromise That’s the character behind Colebatch 12mm, from Sunstar’s Oak Classics – 12mm Builders range, with natural tones and a french country feel.
A European Oak timber board, 12mm thick, with a light brush matte finish and Droplock installation. It’s made by Sunstar Flooring, who supply the Oak Classics – 12mm Builders range through Multifors.
Behind the colour and finish, 029 Colebatch’s real numbers are what determine how it holds up in daily use — a 1.2mm wear layer, a 5 Star acoustic rating and P3 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.888 m² across 8 planks | 30% nested lengths, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 12mm |
|---|---|
| Board Dimensions | 190×1900 |
| Wear Layer | 1.2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Droplock |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.888 m² |
| Planks per Box | 8 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Droplock installation
- French Country-styled interiors, especially in natural colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Assess During Installation — Do not install faulty or damaged boards.
- Clean Surface — Ensure the subfloor is free of debris and structurally sound.
- Leveling — Limit rises and falls to a maximum of 3mm over a 1000mm radius. Smooth imperfections to ensure a maximum 1mm deviation over 250mm area.
- Ventilation & Humidity — Timber subfloors should be well ventilated and meet building regulations for humidity. Concrete subfloors should not exceed 4.8% moisture.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
It’s always important to keep a floor clean, minor dirt and grit can accelerate the wear of coatings.
Use mats both inside and outside of doors leading outside to clean shoes and remove debris before it ends up on the floor. Mats should be kept clean. (Where installed in commercial premises it’s recommended foot traffic passes over a 3.0metre mat).
Recommend you take your shoes off and enjoy the floor under your feet, this will help keep the surface clean. (Always remove shoes with spikes and sharp heels)
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
