Description
Lauxes Grates calls the STI26 its tile insert all-rounder. Your floor tile, up to 11 mm thick, sits in a 100 mm wide, 26 mm deep anodised aluminium tray. See the Lauxes range.
Against the STI21 it takes thicker tile and all four outlets; Lauxes also lists anti-water tracking.
Technical Specifications
| Width x depth | 100 mm x 26 mm |
|---|---|
| Tile thickness | Up to 11 mm thick |
| Material | Anodised aluminium |
| Load rating | Class B, up to 10.2 tonnes on average (per Lauxes) |
| Scope of use | DN90; 40, 50, 72 or 80 mm outlet |
| Full-length weight | 4.7 kg (3.0 m), 9.0 kg (5.6 m) |
| Colours | Silver, Midnight, Gold, Brushed Nickel, Gunmetal and Copper |
| Certification | WaterMark certified, per Lauxes |
| Tech sheet | Lauxes STI26 tech sheet (PDF) |
Where to Use
- Showers
- Step-free entries
- Ensuites
- Tiled balconies and outdoor areas
How to Install
A licensed plumber installs this grate into the puddle flange. Per the Lauxes installation guide (PDF):
- Template the recess — use a template 10-20 mm wider than the grate; the grate must never touch wet cement.
- Grate goes in last — after any waterproofing, tiling and grout; Lauxes recommends wall tiles do not cover the end caps.
- Cut and assemble — tray 3 mm shorter than the finished length (thin caps) or 10 mm (thick caps), top 1 mm shorter than the tray’s internal length; drill the outlet with a Lauxes hole saw.
- Set on silicone blobs — bed it level on large blobs of neutral cure silicone so trapped water escapes to the puddle flange. Glue tile in with neutral cure silicone.
- Finish — clean off residue before it dries; once the blobs set, seal the edge.
Lengths, Colours and What’s Included
Cut to size: enter the finished grate length you need, from 600 to 5600 mm. We cut it to that length and charge for the next 700 mm length up; for example 2200 mm is charged as 2800 mm, and 1400 mm is charged as 1400 mm. Allow for end caps when measuring (the Lauxes guide allowance is in step 3). Full lengths: 3.0 m or 5.6 m. Over 3000 mm, including full 5.6 m lengths, delivery is quoted at checkout (you pay once it’s priced) or you can pick up; up to 3000 mm delivers as normal.
Six colours, including Copper (colours may vary slightly). Included: one matching waste outlet, 40, 50, 72 or 80 mm to your choice, plus two matching end caps, thin (EC26) or thick (TEC26), in every colour including Copper. Copper differs only in length: Lauxes makes it as a full 5.6 m length, so Copper is cut to size up to 5600 mm or sold as a full 5.6 m length.
Important Notes
- Per Lauxes, the grate is WaterMark certified, not part of the waterproofing, and must be installed in a WaterMark puddle flange by a licensed plumber, as legally required.
- Lauxes asks for a soapy-water wash at least every three months, more often near the sea. Confirm outlet size with your plumber.
- Lauxes’ manufacturer’s warranties have conditions: the Lifetime Rustproof Warranty (original owner) needs a licensed plumber installing to AS 3740, a primary clean right after and no metal deposits; the minimum 25-year fade guarantee needs proper care and installation to AS/NZS 3500.2. Excluded: normal wear, misuse or accidental damage. This manufacturer’s warranty is in addition to your rights under the Australian Consumer Law; contact Multifors first if there’s a problem.
Frequently Asked Questions
How thick can the tile be in the Lauxes STI26?
Up to 11 mm, per the Lauxes tech sheet and catalogue.
What does no visible holes mean on the STI26?
Your tile fills the top, per the Lauxes tech sheet. Lauxes says openings are under 8 mm and heel safe.
Which outlet sizes can be used with the STI26?
40, 50, 72 or 80 mm (DN90); Lauxes recommends 80 mm.





































