Description
More than flooring — engineered European Oak parquetry designed to make a statement. Wardell-Herringbone brings that into Sunstar’s Oak Classics – Herringbone range, with brown tones and a traditional feel.
A European Oak timber board, 14mm thick, with a light brush matte finish and Tongue & Groove L+R installation. It’s made by Sunstar Flooring, who supply the Oak Classics – Herringbone range through Multifors.
Behind the colour and finish, Herringbone Flooring – HW001-RZ Wardell-Herringbone’s real numbers are what determine how it holds up in daily use — a 2mm wear layer, a 5 Star acoustic rating and P3 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.016 m² across 28 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 120×600 |
| Wear Layer | 2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove L+R |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.016 m² |
| Planks per Box | 28 Planks |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove L+R installation
- Traditional-styled interiors, especially in brown colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Adhesive Requirements — For direct stick installations, follow adhesive supplier guidelines.
- Non-Acceptable Systems: Heating systems between floating floor and subfloor are not suitable.
- Sunstar’s Engineered Timber products are suitable for direct stick or floating floor installation.
- (Herringbone products Direct stick installation is recommended).
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Regular (aim for daily) sweeping with a soft broom and vacuuming will keep the floor free of debris preventing build up in the joins and grain where exposed. When vacuuming ensuring the head of the vacuum has felt on the underside, let’s not scratch a floor while aiming to look after it.
As required (weekly) the floors are suitable for mopping to ensure they remain clean and fresh, but again remember timber loves to absorb water, moisture can lead to major damage. Always keep the floor dry, use a spray mop to limit the moisture on the floor. The moisture is only to soften and loosen the dirt, let the mop do the work.
When using a mop and bucket, ensure it’s well rung out and the floor is drying immediately after, and moisture isn’t been left on the floor. Avoid spills as you go and dry immediately if you do.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
