Description
Engineered European Oak with 1.2mm Veneer, Budget without Compromise Byron 12mm carries that through in Sunstar’s Oak Classics – 12mm Builders range, with brown tones and a french country feel.
A European Oak timber board, 12mm thick, with a light brush matte finish and Droplock installation. It’s made by Sunstar Flooring, who supply the Oak Classics – 12mm Builders range through Multifors.
Behind the colour and finish, 003 Byron’s real numbers are what determine how it holds up in daily use — a 1.2mm wear layer, a 5 Star acoustic rating and P3 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.888 m² across 8 planks | 30% nested lengths, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 12mm |
|---|---|
| Board Dimensions | 190×1900 |
| Wear Layer | 1.2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Droplock |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.888 m² |
| Planks per Box | 8 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Droplock installation
- French Country-styled interiors, especially in brown colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Floating Floor — Use a 2-3mm foam underlay with a taped moisture barrier, or a 3-10mm rubber underlay as needed.
- Direct Stick — Follow adhesive supplier guidelines to form suitable moisture barrier depending on subfloor. Different Adhesives require different steps.
- Maximum Temperature — Never exceed 28°C.
- Pre-Installation: Run heating at desired temperature for at least one week, then turn off and allow subfloor to cool for 2-3 days.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Never drag heavy furnishings or appliances, take extra care when moving the fridge and other appliances in, the edges are sharp and even the wheels can cause damage if they’re not clean or in good condition.
Tables, chairs, and sofas are often moved back and forth with extreme point loads that can lead to accelerated wear and tear of the coatings or scratching in localised areas. Under legs use felt pads, rugs can also be used in some locations where style can meet practicality, making sure to avoid rugs with rubber backings as these can cause staining.
Even furnishings that aren’t moved often should have a suitable no scratch surface in contact with the flooring.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
