Description
Oak Classics sets the standard: engineered European Oak with a real 2mm veneer. That’s the character behind Colebatch, from Sunstar’s Oak Classics range, with natural tones and a french country feel.
A European Oak timber board, 14mm thick, with a light brush matte finish and Droplock installation. It’s made by Sunstar Flooring, who supply the Oak Classics range through Multifors.
Behind the colour and finish, HW029 Colebatch’s real numbers are what determine how it holds up in daily use — a 2mm wear layer, a 5 Star acoustic rating and P3 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.166 m² across 6 planks | 30% nested lengths, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 190×1900 |
| Wear Layer | 2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Droplock |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.166 m² |
| Planks per Box | 6 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Droplock installation
- French Country-styled interiors, especially in natural colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Direct Stick — Follow adhesive supplier guidelines to form suitable moisture barrier depending on subfloor. Different Adhesives require different steps.
- Maximum Temperature — Never exceed 28°C.
- Pre-Installation: Run heating at desired temperature for at least one week, then turn off and allow subfloor to cool for 2-3 days.
- Gradual Heating — Increase temperature by a maximum of 2°C per day. Maintain a constant temperature once running, with variations of no more than 2°C per day.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Stains and marks — Stubborn stains can be removed with care using methylated spirits on a damp cloth. After removing clean all the methylated spirits from the surface using a fresh damp cloth.
Fine minor white surface scratches: Tibet Almond Stick a very simple method to hide minor scratches. This product is available online for purchase.
Minor indents or scratches causing indentation of the surface: Timbermate wax sticks are available from hardware stores and online, numerous tutorials are also available online.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
