Description
Engineered European Oak with 1.2mm Veneer, Budget without Compromise Wyan 12mm carries that through in Sunstar’s Oak Classics – 12mm Builders range, with light tones and a bohemian feel.
A European Oak timber board, 12mm thick, with a light brush matte finish and Droplock installation. It’s made by Sunstar Flooring, who supply the Oak Classics – 12mm Builders range through Multifors.
Behind the colour and finish, 024 Wyan’s real numbers are what determine how it holds up in daily use — a 1.2mm wear layer, a 5 Star acoustic rating and P3 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.888 m² across 8 planks | 30% nested lengths, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 12mm |
|---|---|
| Board Dimensions | 190×1900 |
| Wear Layer | 1.2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Droplock |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.888 m² |
| Planks per Box | 8 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Droplock installation
- Bohemian-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Direct Stick — Follow adhesive supplier guidelines to form suitable moisture barrier depending on subfloor. Different Adhesives require different steps.
- Maximum Temperature — Never exceed 28°C.
- Pre-Installation: Run heating at desired temperature for at least one week, then turn off and allow subfloor to cool for 2-3 days.
- Gradual Heating — Increase temperature by a maximum of 2°C per day. Maintain a constant temperature once running, with variations of no more than 2°C per day.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
When using a mop and bucket, ensure it’s well rung out and the floor is drying immediately after, and moisture isn’t been left on the floor. Avoid spills as you go and dry immediately if you do.
Never use a steam mop, or caustic cleaning agents.
Bona Wood Floor Cleaner Peerless: JAL Versadet
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
