Description
There’s a natural warmth to genuine native timber that’s hard to replicate. That’s the character behind Blackbutt Feature Brush Finish 136mm, from Sunstar’s Australian Hardwood – Naturals Range range, with light tones and a rustic feel.
A Blackbutt timber board, 14mm thick, with a brush matte finish and Tongue & Groove installation. It’s made by Sunstar Flooring, who supply the Australian Hardwood – Naturals Range range through Multifors.
Behind the colour and finish, Naturals Range Flooring – HB109 Blackbutt Feature Brush Finish 136mm’s real numbers are what determine how it holds up in daily use — a 3mm wear layer, a 4 Star acoustic rating and P4 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 136/190×1900 |
| Wear Layer | 3mm |
| Finish | Brush Matte |
| Species | Blackbutt |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove |
| Acoustic Rating | 4 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P4 |
| Coverage per Box | 2.07 m² |
| Planks per Box | 8 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove installation
- Rustic-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Acclimatization — Boards should always be stored for 48 hours on site to acclimatise. Without opening the cartons, carefully stack the boards up to 5 boxes high with 300mm gap between stacks to allow air to circulate.
- Ends of boxes including plastic wrapping should be opened: during acclimatization on-site
- Dry Lay — Arrange planks before installation to visualize the pattern.
- Mix & Stagger — Mix boards and stagger them for a pleasing design.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Use mats both inside and outside of doors leading outside to clean shoes and remove debris before it ends up on the floor. Mats should be kept clean. (Where installed in commercial premises it’s recommended foot traffic passes over a 3.0metre mat).
Recommend you take your shoes off and enjoy the floor under your feet, this will help keep the surface clean. (Always remove shoes with spikes and sharp heels)
Always keep the floor dry, spills should be immediately cleaned up to prevent the timber absorbing moisture and distorting. Oil, food, drinks, and other household spills including pet accidents should also be cleaned up and wiped clean with a damp cloth to ensure staining does not occur.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
