Description
Genuine native timber has an honest warmth and character nothing else quite matches. That’s the character behind Sydney Blue Gum 190mm, from Sunstar’s Australian Hardwood – Naturals Range range, with light tones and a bohemian feel.
A Sydney Blue Gum timber board, 14mm thick, with a smooth matte finish and 5G or T&G installation. It’s made by Sunstar Flooring, who supply the Australian Hardwood – Naturals Range range through Multifors.
Behind the colour and finish, Naturals Range Flooring – HS604 Sydney Blue Gum 190mm’s real numbers are what determine how it holds up in daily use — a 3mm wear layer, a 4 Star acoustic rating and P4 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 136/190×1900 |
| Wear Layer | 3mm |
| Finish | Smooth Matte |
| Species | Sydney Blue Gum |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | 5G or T&G |
| Acoustic Rating | 4 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P4 |
| Coverage per Box | 2.166 m² |
| Planks per Box | 6 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a 5G or T&G installation
- Bohemian-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Direct Stick — Follow adhesive supplier guidelines to form suitable moisture barrier depending on subfloor. Different Adhesives require different steps.
- Underfloor Heating is not suitable for Australian Hardwood: Sunstar’s Engineered Timber products are suitable for direct stick or floating floor installation. 5G is reccomended for Floating Floor
- Where applicable, T&G is reccomended for Direct Stick Installation.
- (Herringbone products Direct stick installation is required).
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Window protection such as blinds, window tinting or external shading to limit direct sunlight is required to ensure the floor is protected from prolonged direct sun exposure. Use heating and cooling to keep the ambient temperature between 10-30°C and moderate humidity between 35-75% particularly in the more extreme climates of Australia. In Northern Australia take time to understand the settings of your heating and cooling to manage humidity.
It’s always important to keep a floor clean, minor dirt and grit can accelerate the wear of coatings.
Use mats both inside and outside of doors leading outside to clean shoes and remove debris before it ends up on the floor. Mats should be kept clean. (Where installed in commercial premises it’s recommended foot traffic passes over a 3.0metre mat).
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
