Description
Few materials carry the honest warmth and character of real native timber. Tasmanian Oak 190mm brings that into Sunstar’s Australian Hardwood – Naturals Range range, with light tones and a contemporary feel.
A Tasmanian Oak timber board, 14mm thick, with a smooth matte finish and 5G or T&G installation. It’s made by Sunstar Flooring, who supply the Australian Hardwood – Naturals Range range through Multifors.
Behind the colour and finish, Naturals Range Flooring – HT404 Tasmanian Oak 190mm’s real numbers are what determine how it holds up in daily use — a 3mm wear layer, a 4 Star acoustic rating and P4 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 136/190×1900 |
| Wear Layer | 3mm |
| Finish | Smooth Matte |
| Species | Tasmanian Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | 5G or T&G |
| Acoustic Rating | 4 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P4 |
| Coverage per Box | 2.166 m² |
| Planks per Box | 6 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a 5G or T&G installation
- Contemporary-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Clean Surface — Ensure the subfloor is free of debris and structurally sound.
- Leveling — Limit rises and falls to a maximum of 3mm over a 2000mm radius. Smooth imperfections to ensure a maximum 1mm deviation over 250mm area.
- Ventilation & Humidity — Timber subfloors should be well ventilated and meet building regulations for humidity. Concrete subfloors should not exceed 4.8% moisture.
- Floating Floor — Use a 2-3mm foam underlay with a taped moisture barrier, or a 3-10mm rubber underlay as needed.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Even furnishings that aren’t moved often should have a suitable no scratch surface in contact with the flooring.
Under desk chairs or other wheeled furnishings use a non- staining mat and rubber casters. Although be aware rubber will cause staining to the surface of the floor over time, so again select mats without rubber backing.
Be aware like your skin timber can tan in the sun, timber naturally oxidizes in the sun and coatings fade, this is a natural ageing process of a natural product. This should be managed by moving furnishings from time to time to avoid uneven colour changes.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
