Description
Max Bond Adhesive Remover
– 1, 4 and 20 Litre Containers
Max Bond Adhesive Remover is a non-flammable, low odour, solvent cleaner designed
to remove hard-to-clean compounds and old, dry flooring adhesive.
Method of Application:
- Apply directly to dry adhesive with brush, broom or mop.
- Distribute the Adhesive Remover to required areas.
- Allow 2 to 5 minutes for the Adhesive Remover to soak into the old, dried adhesive.
- Use a scrubbing brush or scrubbing pad to agitate the surface.
- A sharp scraper may be required to help remove thick areas of old adhesive.
Rinse:
- Once the above is done, rinse using clean water with a mop or rag.
- A second coat of adhesive remover may be required for hard to remove dried adhesive.
Drying:
- Allow the floor to become dry again prior to the
application of any fresh adhesives. - It is also recommended that you grind the substrate prior to application of adhesive.
Note: Always carry out your own test to confirm suitability of this product
with your application. Additional information on physical properties, health
hazards, storage, handling and transport is available in the Material Safety Data
Sheet (MSDS), available on MJS website.
