Description
Vogue pairs wide-plank engineered European Oak with a genuinely sophisticated, contemporary feel. Lesa brings that into Sunstar’s Vogue range, with light tones and a french country feel.
A European Oak timber board, 14mm thick, with a light brush matte finish and Tongue & Groove installation. It’s made by Sunstar Flooring, who supply the Vogue range through Multifors.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 220×2200 |
| Wear Layer | 3mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.904 m² |
| Planks per Box | 6 Planks | 30% Nested Lengths |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove installation
- French Country-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Tropical Locations — In areas with extreme humidity (e.g., QLD), increase expansion gaps to a minimum of 15mm (see installation in Tropical locations technical note).
- Room Temperature — Maintain consistent room temperature before, during, and after installation.
- Avoid Fixing Skirtings & Scotia: Do not attach skirtings, scotia or trims to the flooring. Floorings natural movement must be allowed for.
- No Caulking or Adhesives — Never caulk the floor or Use adhesive to fix trims to the flooring.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Regular (aim for daily) sweeping with a soft broom and vacuuming will keep the floor free of debris preventing build up in the joins and grain where exposed. When vacuuming ensuring the head of the vacuum has felt on the underside, let’s not scratch a floor while aiming to look after it.
As required (weekly) the floors are suitable for mopping to ensure they remain clean and fresh, but again remember timber loves to absorb water, moisture can lead to major damage. Always keep the floor dry, use a spray mop to limit the moisture on the floor. The moisture is only to soften and loosen the dirt, let the mop do the work.
When using a mop and bucket, ensure it’s well rung out and the floor is drying immediately after, and moisture isn’t been left on the floor. Avoid spills as you go and dry immediately if you do.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
