Description
Engineered European Oak parquetry that reads as a statement, not just flooring. Clunes-Herringbone brings that into Sunstar’s Oak Classics – Herringbone range, with dark tones and a french country feel.
A European Oak timber board, 14mm thick, with a light brush matte finish and Tongue & Groove L+R installation. It’s made by Sunstar Flooring, who supply the Oak Classics – Herringbone range through Multifors.
Behind the colour and finish, Herringbone Flooring – HW021-RZ Clunes-Herringbone’s real numbers are what determine how it holds up in daily use — a 2mm wear layer, a 5 Star acoustic rating and P3 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a Multi-Ply Engineered Core core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.016 m² across 28 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 120×600 |
| Wear Layer | 2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove L+R |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.016 m² |
| Planks per Box | 28 Planks |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove L+R installation
- French Country-styled interiors, especially in dark colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Ventilation & Humidity — Timber subfloors should be well ventilated and meet building regulations for humidity. Concrete subfloors should not exceed 4.8% moisture.
- Floating Floor — Use a 2-3mm foam underlay with a taped moisture barrier, or a 3-10mm rubber underlay as needed.
- Direct Stick — Follow adhesive supplier guidelines to form suitable moisture barrier depending on subfloor. Different Adhesives require different steps.
- Maximum Temperature — Never exceed 28°C.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Window protection such as blinds, window tinting or external shading to limit direct sunlight is required to ensure the floor is protected from prolonged direct sun exposure. Use heating and cooling to keep the ambient temperature between 10-30°C and moderate humidity between 35-75% particularly in the more extreme climates of Australia. In Northern Australia take time to understand the settings of your heating and cooling to manage humidity.
It’s always important to keep a floor clean, minor dirt and grit can accelerate the wear of coatings.
Use mats both inside and outside of doors leading outside to clean shoes and remove debris before it ends up on the floor. Mats should be kept clean. (Where installed in commercial premises it’s recommended foot traffic passes over a 3.0metre mat).
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
