Description
Naturale 3.0 gives distinct personal style a luxury vinyl floor to stand on. That’s the character behind Tallowwood, from Sunstar’s Naturale 3.0 range, with light tones and a traditional feel.
An LVP board, 3mm thick, with a matte finish and Direct Stick installation. It’s made by Sunstar Flooring, who supply the Naturale 3.0 range through Multifors.
Technical Specifications
| Thickness | 3mm |
|---|---|
| Board Dimensions | 177.8×1219.2 |
| Wear Layer | 0.5mm |
| Finish | Matte |
| Surface Coating | PU Coating |
| Installation Method | Direct Stick |
| Acoustic Rating | 4 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P2 |
| Coverage per Box | 3.26 m² |
| Planks per Box | 15 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Anywhere suited to a Direct Stick installation
- Traditional-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Maximum Temperature — Never exceed 26°C and ensuring suitable direct stick adhesive is used.
- Pre-Installation: In slab heating should be ran for at least 2 weeks at desired temperature before being turned off 4 days before installation.
- Gradual Heating — 48 hours after the installation has been completed, increases to temperature can be made by a maximum of 2°C per day. Maintain a constant temperature once running, with variations of no more than 2°C per day 26* or desired temperature is reached.
- Confirm Suitability — Check with heating system supplier for suitability of floor coverings; the product warranty does not cover improper installations.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Tables, chairs, and sofas are often moved back and forth with extreme point loads that can lead to accelerated wear and tear of the coatings or scratching in localised areas. Under legs use felt pads, rugs can also be used in some locations where style can meet practicality, making sure to avoid rugs with rubber backings as these can cause staining.
Even furnishings that aren’t moved often should have a suitable no scratch surface in contact with the flooring. Under desk chairs or other wheeled furnishings use a non- staining mat and rubber casters. Although be aware rubber will cause staining to the surface of the floor over time, so again select mats without rubber backing.
Be aware like your skin timber can tan in the sun, timber naturally oxidizes in the sun and coatings fade, this is a natural ageing process of a natural product. This should be managed by moving furnishings from time to time to avoid uneven colour changes.
Full care guide available as a downloadable PDF above.
Warranty
- 25 years residential
- 10 years commercial
- Lifetime structural
