Description
The authentic charm of real timber, in the convenience of a luxury vinyl plank. Spotted Gum brings that into Sunstar’s Oatlands range, with light tones and a traditional feel.
An LVP board, 2mm thick, with a matte finish and Direct Stick installation. It’s made by Sunstar Flooring, who supply the Oatlands range through Multifors.
Behind the colour and finish, OAT8283 Spotted Gum’s real numbers are what determine how it holds up in daily use — a 0.3mm wear layer, a 5 Star acoustic rating and P4 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a PVC Core core with PUR Coating surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 3.671 m² across 16 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 2mm |
|---|---|
| Board Dimensions | 187×1227 |
| Wear Layer | 0.3mm |
| Finish | Matte |
| Core Construction | PVC Core |
| Surface Coating | PUR Coating |
| Installation Method | Direct Stick |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P4 |
| Coverage per Box | 3.671 m² |
| Planks per Box | 16 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Anywhere suited to a Direct Stick installation
- Traditional-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Temperature — Aim to always store at room temperature (18°-27°c) as well as install at desired room temperature.
- Acclimatisation — Material should sit at installation site 24-48 hours prior to installation, let the product time to acclimatize in the room between 18°-27°c.
- NOTE — If Applicable, HVAC systems, Evaporative cooling should be in effect 24 hours before, during and 24 hours after the installation.
- Limiting any direct sunlight exposure during the acclimatization period. Window coverings should be used to eliminate sunlight exposure if applicable.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Window protection such as blinds, window tinting or external shading to limit direct sunlight is required to ensure the floor is protected from prolonged direct sun exposure. Use heating and cooling to keep the ambient temperature between 10-30°C and moderate humidity between 35-75% particularly in the more extreme climates of Australia. In Northern Australia take time to understand the settings of your heating and cooling to manage humidity.
It’s always important to keep your floor clean, minor dirt and grit can accelerate the wear of coatings.
Use mats both inside and outside of doors leading outside to clean shoes and remove debris before it ends up on the floor. Mats should be kept clean. (Where installed in commercial premises it’s recommended foot traffic passes over a 3.0metre mat).
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
