Description
With Keeta, laminate flooring becomes the statement piece — your style takes centre stage. That’s the character behind Smoke Oak, from Sunstar’s Keeta range, with cool tones and a hamptons feel.
A laminate board, 8mm thick, with a super matte finish and Uniclic installation. It’s made by Sunstar Flooring, who supply the Keeta range through Multifors.
Behind the colour and finish, KEE805 Smoke Oak’s real numbers are what determine how it holds up in daily use — an AC4 Light Commercial rating, a 5 Star acoustic rating and P2 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on an Ultra HDF Core core with Aluminium Oxide – 72 Hour Water Resistant Surface surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.12 m² across 9 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 8mm |
|---|---|
| Board Dimensions | 194×1215 |
| Finish | Super Matte |
| Core Construction | Ultra HDF Core |
| Surface Coating | Aluminium Oxide – 72 Hour Water Resistant Surface |
| Installation Method | Uniclic |
| AC / Wear Rating | AC4 Light Commercial |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P2 |
| Coverage per Box | 2.12 m² |
| Planks per Box | 9 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Light commercial applications (AC4 Light Commercial)
- Anywhere suited to a Uniclic installation
- Hamptons-styled interiors, especially in cool colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Floating Floor — Use a 2-3mm foam underlay with a taped moisture barrier, or a 3-10mm rubber underlay as needed.
- Direct Stick — Follow adhesive supplier guidelines to form suitable moisture barrier depending on subfloor. Different Adhesives require different steps.
- Maximum Temperature — Never exceed 28°C.
- Pre-Installation: Run heating at desired temperature for at least one week, then turn off and allow subfloor to cool for 2-3 days.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Under desk chairs or other wheeled furnishings use a non- staining mat and rubber casters. Although be aware rubber will cause staining to the surface of the floor over time, so again select mats without rubber backing.
Be aware like your skin timber can tan in the sun, timber naturally oxidizes in the sun and coatings fade, this is a natural ageing process of a natural product. This should be managed by moving furnishings from time to time to avoid uneven colour changes.
If exposed to direct sunlight for prolonged periods timber can also suffer more serious issues such as minor cracking. The floors are designed for an indoor surface and need to be kept in comfortable living temperatures. Excessive heat, humidity and fluctuations in temperature can cause the floor to distort.
Full care guide available as a downloadable PDF above.
Warranty
- 25 years residential
- 5 years commercial
- Lifetime structural
