Description
Soudal Water Resistant PVA Wood Glue
– 250ml and 500ml Squeeze Bottles
Soudal Water Resistant PVA Wood Glue is a ready to use, fast drying, PVA-based
adhesive with superior water resistance.
Properties
Soudal Water Resistant PVA Wood Glue has the following properties:
- Easy to tool
- Transparent after drying
- High end strength
- Fast drying time
- Resistant to high temperatures
Applications
Soudal Water Resistant PVA Wood Glue is suitable for the following applications:
- Interior applications with frequent short-term exposure of the bonds to
running or condensed water. - Interior applications which are exposed to high relative humidity.
- Exterior applications which are not exposed to weather factors.
- Manufacturing of door and window frames that need to meet class D3
according to EN204. - Bonding of wood, board, chipboard, veneer.
- Mounting of soft wood.
- Construction bonding such as mortise and tenon joints, punches, etc.
- Stationary edge-banding with veneers, plastic laminates and solid wood
strips. - Surface-bonding of decor-finish film, HPL and CPL to chipboard, MDF and
plywood. - Bonding joints in boards and block-bonding of softwood, hardwood and
chipboard.
Packaging
- Colour: white
- Packaging: 250ml, 500ml, 1 Litre and 5 Litres
Shelf life
- Soudal Water Resistant PVA Wood Glue has a shelf life of at least 12
months in unopened packaging kept in a dry storage place at temperatures between
+5°C and +25°C.
Application Method:
Application method:
- Apply Soudal Water Resistant PVA Wood Glue with a notched trowel, brush
or machine on one of the materials to be bonded. - Join the parts together and clamp for 1 to 2 hours.
Pressing Times:
- If applicable, curing time depends strongly on the type of wood used,
temperature, amount of adhesive and the porosity of the materials to be bonded. - Minimum pressing times High-frequency bonding with longitudinal heating
> 15 sec. and Dekor-finish 5 – 10 sec. - Minimum pressing times assembly bondings: 8 – 15 min.
- Minimum pressing times bonding joints and block bonding: 10 – 15 min.
- Surface bonding of HPL/CPLin short cycle presses at 70°C: to plywood
approx. 90 sec. and to chipboard approx. 45 sec.
Cleaning:
- Before curing, Soudal Water Resistant PVA Wood Glue can be removed with
water from substrates and tools. - Cured Trade Water Resistant PVA Adhesive can only be removed
mechanically.
Repair:
- With the same material
Substrates:
Substrates:
- Many non-porous and porous substrates like wood, carton, laminate, etc.
Nature:
- The to be bonded materials should be flat and well fitting as well as
clean, dry and free of dust and grease.
Surface Preparation:
- Slightly grinding smooth non-porous surfaces can improve the adhesion.
We recommend a preliminary compatibility test.
Health and Safety Recommendations
- Take the usual labour hygiene into account.
Remarks:
- When bonding certain woods such as beech and cherry discoloration may
occur because of the variety of composition and pretreatment. - Do not dilute the adhesive.
- Consult label and material safety data sheet for more information.
