Roberts R679 Latex Broadloom Carpet Adhesive

By RLA Polymers

SKU: MJ-Roberts-R679
Brands: ,
Price range: $24.00 through $219.00

Choose how you’ll get it

Delivery

Enter your postcode for a delivery date.

Pick up Free

Choose collection point

Collect from: Hindmarsh, Botany, Brendale, Burleigh Heads, Molendinar, West Gosford, Hallam, Hoppers Crossing, Mansfield, Mitcham, Jesmond, Newtown, Sunshine, Thomastown, Wetherill Park, Unanderra, Yatala, Moonah, Prospect Vale, Fyshwick, Boambee

ROBERTS R679 Carpet Latex is a compounded latex product used for the sealing of raw edges, strengthening worn backing, replacing damaged nap, and adhering pad underlays to Subfloors.

Size
Price range: $24.00 through $219.00

Description

Roberts R679 Latex Broadloom Carpet Adhesive
– 1, 5 and 15 Litres

ROBERTS R679 Carpet Latex is a compounded latex product used for the sealing of raw edges, strengthening worn backing, replacing damaged nap, and adhering pad underlays to Subfloors.

 

DOMESTIC UNDERLAYS:

  • Apply a liberal amount of latex to a dry, clean, sound, and smooth substrate.
  • Place underlay into the wet latex and install underlays by manufacturers’ recommendations.

 

SEALING SELVEDGE:

  • Before Heat Bond Seaming, most tufted and woven carpets are prone to lose tufts or unravel after the selvedge is trimmed.
  • It is recommended that Carpet Latex be applied to the edge of the seam before Head Bond Seaming.
  • Work latex into the edge and allow it to dry before seaming.

 

WORN BACKING:

  • Lay the carpet face down.
  • Apply a liberal amount of latex to the carpet backing with a brush or roller to the areas that need attention to ensure a good bond.
  • Allow the carpet to dry in position for 4-5 hours.

 

CLEAN UP:

  • Clean tools immediately after use with water.
  • The dried adhesive may be cleaned off using ROBERTS R550
    Latex/Acrylic Adhesive Remover applied to a damp cloth, then rubbed gently over the dried adhesive or with RLA Handy Wipes.

 

PACKAGING:

  • 1, 5 and 15 Litre Containers

 

SHELF LIFE/STORAGE:

  • 12 months when stored in original unopened packaging
  • Shall be stored in a dry area off the ground.

 

SAFETY AND HANDLING:

KEEP AWAY FROM HEAT/SPARKS/OPEN FLAMES/HOT SURFACES/NO SMOKING

  • Use in well-ventilated areas.
  • Avoid contact with skin and eyes.
  • Wear eye protection and suitable gloves and clothing.
  • Do not eat, drink, or smoke while using this product.
  • Take off contaminated clothing and wash it before reuse.
  • If on the skin, wash with plenty of soap and water.
  • If in the eyes: rinse cautiously with water for several minutes.
  • Remove contact lenses; if present, continue rinsing.
  • If inhaled, remove to fresh air, and keep them at rest in a position comfortable for breathing.
  • If any skin or eye irritation persists or you feel unwell, get medical attention.

 

FIRST AID:

  • If poisoning occurs, contact a doctor or Poisons Information Centre.
  • For advice or if you feel unwell, contact a Poisons Information Centre: Australia ph. 131126,
    New Zealand ph. 0800 764 766 or a doctor at once.
  • If swallowed, DO NOT induce vomiting. Give a glass of water.
  • IF SWALLOWED, immediately call the Poisons Information Centre or a doctor.
  • IF ON SKIN Remove immediately all contaminated clothing and wash skin with soap and water.
  • If skin irritation occurs, get medical advice/attention.
  • IF IN EYES Rinse carefully with water for several minutes.
  • If eye irritation persists, get medical advice/attention.
  • Refer to The Safety Data Sheet available with the Multifors product data.

Key Features

  • Compounded latex for carpet edges, backing and underlay
  • Seals raw carpet edges before seaming
  • Strengthens worn carpet backing and replaces damaged nap
  • Adheres pad underlays to subfloors
  • Tools clean up with water immediately after use
  • Supplied in 1 and 5 litre jerry cans and 15 litre pails

Additional information

Weight N/A
Dimensions N/A
Range

Carpet Latex

Size

1 Litre Jerry Can, 5 Litre Jerry Can, 15 Litre Pail

Frequently asked questions

What is Roberts R679 Carpet Latex used for?

Sealing raw carpet edges, strengthening worn backing, replacing damaged nap, and sticking pad underlays down to the subfloor. It is a carpet-fitter’s consumable rather than a full-spread adhesive.

How is it used before seaming?

Most tufted and woven carpets shed along a cut edge, so work latex into the edge of the seam with a brush and let it dry fully before heat bonding. Seaming into wet latex is the common mistake.

How long does it take to dry?

Allow four to five hours when latex has been applied to carpet backing and the carpet is drying in position. Clean tools with water straight after use, because cured latex needs a solvent remover to shift.

Related Products

Added to cart

View cart