Description
Loba Argo Drying Time Extender – 250ml
Loba Argo Drying Time Extender is an additive used to prolong the drying time of all
LOBA Water-based finishes and considerably minimises the risk of lap marks.
Product Advantages
- Reduces the risk of lap marks.
- Finish film properties are unchanged
Range of Uses
- Perfectly adjusted for water-based LOBA finishes.
Application
- Argo can be added to all LOBA Water-based finishes.
- Max. addition quantity 5%.
- One container (250 ml) of Argo is mixed into 5 l (5 kg) of finish.
- Shake the contents well.
- Observe general and, if necessary, product-specific occupational
health and safety regulations. Further information can be
found in the GISCODE-related operating instructions which are
available under www.wingis-online.de.
DRYING TIME
- Depending on the room conditions, the drying time until the mixed finishes can be walked on and re-finished and intermediate sanding can be performed is extended by approx. 50%.
- The drying time until full traffic capability remains
unchanged.
INTEGRATION:
- Only add the additive immediately before application and shake or
stir thoroughly. - For dual-component systems, the additive is only
added once the hardening agent has been integrated into the
putty! - 1-component finish mixed with additive must be processed
within 24 hours, 2-component finish must be processed within
the specified processing time. - Any storage stability beyond this period cannot be guaranteed.
