Description
L Shape Edge Trim with Multi-Height Base provides expansion control specifically at the perimeter of retro-fitted flooring materials, solving a genuine renovation problem: existing skirting boards usually need to come off and go back on to correctly detail a floor’s edge, adding real labour and risk of damage to the skirting itself. This trim’s L-shaped profile is designed to sit against the existing skirting without that removal step, while still providing rigid, correctly detailed perimeter expansion control.
At just 23mm wide, its minimalist profile keeps the visual footprint small along the room’s perimeter, and like the rest of the Multi-Height Base trim family, it separates into a base component (matched to the actual gap height) and a push-click cover trim on top. That two-part system means the correct base — MJ40, MJ405 or MJ41 depending on height — can be selected for the specific job before the L Shape cover clicks into place.
Because it’s part of the wider Multi-Height Base trim family, L Shape Edge Trim shares its two-part logic with the rest of the range: a base component that’s matched precisely to the actual gap height at the floor’s perimeter, and a cover trim that push-clicks on top once that base is fixed. That separation is what makes the system genuinely adaptable across different renovation scenarios — the same L Shape cover trim can sit over any of the three available base heights, so the correct combination is chosen for the specific gap rather than needing an entirely different trim for each height variation.
Technical Specifications
| Width | 23mm |
|---|---|
| Length | 3.3m |
| Multi-Height Base (MJ40) | 5.5 – 9.2mm |
| Multi-Height Base (MJ405) | 9.0 – 12.7mm |
| Multi-Height Base (MJ41) | 12.0 – 15.7mm |
| Finishes | Matt Black, Matt Bronze, Matt Champagne, Matt Silver |
| Supplier code | MJ44 |
Where to Use
- Perimeter expansion joints on retro-fitted flooring
- Renovation jobs wanting to avoid skirting board removal
- Rooms needing a rigid, minimalist perimeter expansion detail
How to Apply
- Measure the perimeter gap — select the correct Multi-Height Base (MJ40, MJ405 or MJ41) for the height.
- Fix the base — install the Multi-Height Base against the existing skirting at the floor perimeter.
- Cut the L Shape trim to length — trim the 3.3m length to suit the run.
- Push-click into place — fit the L Shape cover trim down over the installed base until it clicks securely.
Important Notes
- Confirm the correct Multi-Height Base for the actual perimeter gap before ordering.
- The cover trim and base are a two-part system; both need to be specified together.
- Select the anodised finish to coordinate with the surrounding flooring and skirting.
