Description
Engineered European Oak parquetry that reads as a statement, not just flooring. Hastings-Herringbone carries that through in Sunstar’s Oak Classics – Herringbone range, with light tones and a hamptons feel.
A European Oak timber board, 14mm thick, with a light brush matte finish and Tongue & Groove L+R installation. It’s made by Sunstar Flooring, who supply the Oak Classics – Herringbone range through Multifors.
Technical Specifications
| Thickness | 14mm |
|---|---|
| Board Dimensions | 120×600 |
| Wear Layer | 2mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove L+R |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.016 m² |
| Planks per Box | 28 Planks |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove L+R installation
- Hamptons-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- When installing direct stick, always follow adhesive supplier recommendations, taking care to select the right adhesive based on the subfloor type. And then select the correct trowel size and type to suit the adhesive, incorrect selection of trowel can lead to adhesive and moisture barrier failure.
- Allowance for Expansion — Timber expands and contracts with changing seasons and temperatures.
- Expansion Gaps — Provide a minimum 10mm gap around the entire perimeter including where it meets any vertical obstructions such as walls, fixed furnishings, plumbing penetrations and flooring transitions.
- Tropical Locations — In areas with extreme humidity (e.g., QLD), increase expansion gaps to a minimum of 15mm (see installation in Tropical locations technical note).
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Under desk chairs or other wheeled furnishings use a non- staining mat and rubber casters. Although be aware rubber will cause staining to the surface of the floor over time, so again select mats without rubber backing.
Be aware like your skin timber can tan in the sun, timber naturally oxidizes in the sun and coatings fade, this is a natural ageing process of a natural product. This should be managed by moving furnishings from time to time to avoid uneven colour changes.
If exposed to direct sunlight for prolonged periods timber can also suffer more serious issues such as minor cracking. The floors are designed for an indoor surface and need to be kept in comfortable living temperatures. Excessive heat, humidity and fluctuations in temperature can cause the floor to distort.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
