Description
Transform a room with the oversized scale of Naturale 5.0’s luxury vinyl planks. Champagne carries that through in Sunstar’s Naturale 5.0 range, with light tones and a hamptons feel.
An LVP board, 4.5mm thick, with a matte finish and Direct Stick installation. It’s made by Sunstar Flooring, who supply the Naturale 5.0 range through Multifors.
Technical Specifications
| Thickness | 4.5mm |
|---|---|
| Board Dimensions | 228.6×1524 |
| Wear Layer | 0.5mm |
| Finish | Matte |
| Surface Coating | PU Coating |
| Installation Method | Direct Stick |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.79 m² |
| Planks per Box | 8 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Anywhere suited to a Direct Stick installation
- Hamptons-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Trowel — 1.6mm V-Notch Trowel should be used to spread Hard-set adhesive onto subfloor.
- Roller — 45 Kg hand roller should be used to press and roll out freshly laid planks to ensure proper adhesion. Making sure to roll in both directions for thorough adhesion.
- Storage — Material should be removed from packaging for at least 24 hours prior to installation and allowed to acclimatize on installation site. Material should be rested on a flat surface and is allowed to be stacked 500mm tall and at least 100mm away from each stack of flooring.
- Temperature — Aim to always store at room temperature (18°-27°c) as well as install at desired room temperature.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
If exposed to direct sunlight for prolonged periods timber can also suffer more serious issues such as minor cracking. The floors are designed for an indoor surface and need to be kept in comfortable living temperatures. Excessive heat, humidity and fluctuations in temperature can cause the floor to distort.
Window protection such as blinds, window tinting or external shading to limit direct sunlight is required to ensure the floor is protected from prolonged direct sun exposure. Use heating and cooling to keep the ambient temperature between 10-30°C and moderate humidity between 35-75% particularly in the more extreme climates of Australia. In Northern Australia take time to understand the settings of your heating and cooling to manage humidity.
It’s always important to keep your floor clean, minor dirt and grit can accelerate the wear of coatings.
Full care guide available as a downloadable PDF above.
Warranty
- 25 years residential
- 10 years commercial
- Lifetime structural
