Name: Megapoxy HX Extra Low Viscosity Epoxy Resin
Price: 189 AUD

Description

Megapoxy HX Extra Low Viscosity Epoxy Resin

Megapoxy HX Extra Low Viscosity Epoxy Resin:

is a specially formulated extra low viscosity, 100% solids, resin
based, solvent-free, hydrophilic liquid resin.
is used regularly for the repair of cracked concrete by gravity
penetration or low pressure injection.
is also suitable for impregnation of porous substrates such as masonry
and timber.
has also been used successfully as a low viscosity laminating resin for
fibreglass work.

Megapoxy HX Extra Low Viscosity Epoxy Resin is a solvent-free, extra
low viscosity, hydrophilic epoxy resin for many types of bonding and filling
applications.
It is clear setting and it is conveniently packaged in 4 litre and 20
litre kits with a simple 3:1 mix ratio.
It has a 60-minute work time with a 24-hour cure time at 25ºC.

Before you begin mixing, you need to ensure that all contact surfaces
like metal, concrete and stone are clean and clear of oil, dust and any other
surface contaminants.
Concrete and stone surfaces should be prepared by grinding the surface
and removing all the dust and debris. This helps ensure effective bonding contact.
Compressed air can be used to remove dust from cracks and holes. Clean
metal surfaces with acetone to remove any oils or contaminants.

Megapoxy HX Extra Low Viscosity Epoxy Resin is VOC-free. As with all
epoxy resins, please wear appropriate PPE, including eyewear gloves and clothing.

IMPORTANT. Only make a suitable quantity that can be used within the 60-
minute work time!

Additional batches can be mixed after the previous is mixed and
applied. Even as they cure.
The recommended mixing time for Megapoxy HX Extra Low Viscosity Epoxy
Resin is 3 minutes. Mix first for 2 minutes, before scraping the sides and then mix
for another one minute until the product is completely uniform in colour.
Megapoxy HX is easily mixed by hand. For larger projects and larger
volumes of product, you can mix mechanically.
Using measuring tubs, pour the required amount of Part A. Allow enough
volume in the mixing tub for the full amount of epoxy. Pour in the correct amount
of Part B.
We recommend mixing Megapoxy HX for 3 minutes using a timer. Set a
timer for 2 minutes. Begin slowly mixing by placing a flat spatula into the mix (to
the base of the tub) and slowly stir. The two parts are still visibly streaky until
combined. As the epoxy is mixed it will change from clear to milky, then back to
clear.
Ensure you scape around the base and sides to gather all the un-mixed
epoxy and continue to mix.
After 2 minutes, scrape any un-mixed product off the sides of the
container and the spatula before mixing again for a further one minute (set timer).
After the one minute is complete the Megapoxy HX should appear even, streak-free
and ready for use.
Do not be concerned if some bubbles are visible, as they will dissipate
as the epoxy warms and cures. A vacuum chamber can be used to remove any bubbles
for craft applications.

Megapoxy HX is recommended for concrete crack injection repairs and
casting.
Applying Megapoxy HX Extra Low Viscosity Epoxy Resin is easy and fast.
It will cure even in cold or damp conditions. Stronger than concrete with good
chemical resistance, it can be applied by paint brush directly onto cracks or
poured in using a plastic dispensing bottle.
Megapoxy HX is a water and food-safe contact material for commercial
surfaces (complies with AS/NZ 4020:2018 testing of products for use in contact with
drinking water).

Uncured Megapoxy HX Extra Low Viscosity Epoxy Resin can be cleaned with
Megapoxy Thinners.
Please Dispose of contents and container in accordance with local,
regional, national and international regulations.

Although applying Megapoxy HX Extra Low Viscosity Epoxy Resin is easy
and fast, it will cure stronger than concrete with good chemical resistance and can
be machined, sanded and polished to a fine finish.
For further technical information, refer to TDS.