Lauxes NXT26 Linear Floor Grate

By Lauxes

Browse all long drains →

SKU: WD-Lauxes-NXT26
Tags: ,
Brands:
Price range: $130.00 through $812.00

Choose how you’ll get it

Delivery

Enter your postcode for a delivery date.

Pick up Free

Choose collection point

Collect from: Port Melbourne

Called the everyday all-rounder by Lauxes, the NXT26 is a 26 mm deep anti-tracking grate for showers, bathrooms and outdoor floors alike. It comes in six anodised finishes, each with a matching outlet in any of four sizes, cut to length or as a full length.

Colour
Waste outlet

A matching waste outlet and two matching end caps come with every grate, in every length.

Required · Choose 1

Price range: $130.00 through $812.00

You may also need

Description

Lauxes Grates calls the NXT26 its everyday all-rounder. It is a 100 mm wide, 26 mm deep anodised aluminium grate with anti-tracking side slots, for indoor or outdoor floors. Compare the Lauxes range.

The top rolls out without tools for cleaning.

Technical Specifications

Width x depth 100 mm x 26 mm
Material Anodised aluminium
Load rating Class B, up to 10.2 tonnes on average (per Lauxes)
Scope of use DN90; 40, 50, 72 or 80 mm outlet
Full-length weight 4.7 kg (3.0 m), 9.0 kg (5.6 m)
Colours Silver, Midnight, Gold, Brushed Nickel, Gunmetal and Copper
Certification WaterMark certified, per Lauxes
Tech sheet Lauxes NXT26 tech sheet (PDF)

Where to Use

  • Showers
  • Bathroom floors
  • Balconies and tiled outdoor living areas
  • Pool surrounds, cleaned regularly

How to Install

A licensed plumber installs this grate into the puddle flange. Per the Lauxes installation guide (PDF):

  1. Use a template — form the provision with a template 10-20 mm wider than the grate, never the grate itself.
  2. Tile before the grate — complete any waterproofing and tiling first; Lauxes recommends keeping wall tiles off the end caps.
  3. Trim and fit — tray 3 mm shorter than the finished length (thin caps) or 10 mm (thick caps); top 1 mm shorter than the tray’s internal length. Hole-saw the outlet; silicone in caps and outlet.
  4. Secure it — level, on large neutral cure silicone blobs that leave a path for trapped water to the puddle flange.
  5. Clean and seal — wipe off residue at once; once the blobs dry, silicone the edge.

Lengths, Colours and What’s Included

Order a full 3.0 m or 5.6 m length, or cut to size: enter the finished grate length you need, from 600 to 5600 mm, and we cut it to that length, charging for the next 700 mm length up (2200 mm is charged as 2800 mm; 1400 mm is charged as 1400 mm). Allow for end caps when measuring (the Lauxes guide allowance is in step 3). For full 5.6 m lengths and cuts over 3000 mm, request a delivery quote at checkout and pay once it’s priced, or pick up; up to 3000 mm delivers as normal.

Six colours, including Copper (colours may vary slightly). Every grate includes one matching 40, 50, 72 or 80 mm waste outlet of your choice and two matching end caps, thin (EC26) or thick (TEC26), in every colour including Copper. Copper differs only in length: Lauxes makes it as a full 5.6 m length, so Copper is cut to size up to 5600 mm or sold as a full 5.6 m length.

Important Notes

  • Lauxes advises its grates are WaterMark certified, are not part of the waterproofing, and must go in a WaterMark puddle flange, installed by a licensed plumber as legally required.
  • Wash with soapy water at least every three months, more often in marine settings; no abrasives or acids. Confirm outlet size with your plumber.
  • Lauxes’ manufacturer’s warranties have conditions: the Lifetime Rustproof Warranty (original owner) needs a licensed plumber installing to AS 3740, a primary clean right after and no metal deposits; the minimum 25-year fade guarantee needs proper care and installation to AS/NZS 3500.2. Excluded: normal wear, misuse or accidental damage. This manufacturer’s warranty is in addition to your rights under the Australian Consumer Law; contact Multifors first if there’s a problem.

Frequently Asked Questions

How does the NXT26 compare with other NXT grates?

All four are 100 mm wide, differing in depth: 14, 21, 26 and 35 mm.

How do I clean a Lauxes NXT26?

Roll the top out and wash it with soapy water and a soft brush, at least every three months.

Can the NXT26 be used for a step-free shower?

Lauxes recommends its NeXT Generation and tile insert grates for barrier-free entries; falls and waterproofing must meet AS 3740, set out by your plumber and waterproofer.

Key Features

  • The Lauxes everyday all-rounder: 100 mm wide x 26 mm deep
  • Anti-tracking side slots with an easy roll-out top
  • Suits indoor and outdoor applications, per Lauxes
  • Lauxes rates it Class B, up to 10.2 tonnes on average
  • Six finishes incl. Copper (Copper in 5.6 m length only), each with matching outlet and end caps
  • WaterMark certified, per Lauxes
  • Lauxes Lifetime Rustproof Warranty (original owner) and minimum 25-year fade guarantee (conditions apply)

Additional information

Length

Cut to size, Full length 3.0 m, Full length 5.6 m

Colour

Brushed Nickel, Copper, Gold, Gunmetal, Midnight, Silver

Variation

Matching 40mm Waste Outlet, Matching 50mm Waste Outlet, Matching 72mm Waste Outlet, Matching 80mm Waste Outlet

Accessory Range

Drains

Frequently asked questions

How does the NXT26 compare with other NXT grates?

All four are 100 mm wide, differing in depth: 14, 21, 26 and 35 mm.

How do I clean a Lauxes NXT26?

Roll the top out and wash it with soapy water and a soft brush, at least every three months.

Can the NXT26 be used for a step-free shower?

Lauxes recommends its NeXT Generation and tile insert grates for barrier-free entries; falls and waterproofing must meet AS 3740, set out by your plumber and waterproofer.

Related Products

Added to cart

View cart