Description
Bold, extra-large luxury vinyl planks designed to transform a space. Truffle carries that through in Sunstar’s Naturale 5.0 range, with dark tones and a hamptons feel.
An LVP board, 4.5mm thick, with a matte finish and Direct Stick installation. It’s made by Sunstar Flooring, who supply the Naturale 5.0 range through Multifors.
Technical Specifications
| Thickness | 4.5mm |
|---|---|
| Board Dimensions | 228.6×1524 |
| Wear Layer | 0.5mm |
| Finish | Matte |
| Surface Coating | PU Coating |
| Installation Method | Direct Stick |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.79 m² |
| Planks per Box | 8 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Anywhere suited to a Direct Stick installation
- Hamptons-styled interiors, especially in dark colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Shrinking, cupping and minor cracking is expected when this product is used in conjunction with in-slab heating. None of the before mentioned are considered product defects / faults.
- Sunstar’s Direct stick vinyl products should only be installed using a direct stick method. Ensuring that all the correct precautions and procedures are followed to insure correct installation.
- Trowel — 1.6mm V-Notch Trowel should be used to spread Hard-set adhesive onto subfloor.
- Roller — 45 Kg hand roller should be used to press and roll out freshly laid planks to ensure proper adhesion. Making sure to roll in both directions for thorough adhesion.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Tables, chairs, and sofas are often moved back and forth with extreme point loads that can lead to accelerated wear and tear of the coatings or scratching in localised areas. Under legs use felt pads, rugs can also be used in some locations where style can meet practicality, making sure to avoid rugs with rubber backings as these can cause staining.
Even furnishings that aren’t moved often should have a suitable no scratch surface in contact with the flooring. Under desk chairs or other wheeled furnishings use a non- staining mat and rubber casters. Although be aware rubber will cause staining to the surface of the floor over time, so again select mats without rubber backing.
Be aware like your skin timber can tan in the sun, timber naturally oxidizes in the sun and coatings fade, this is a natural ageing process of a natural product. This should be managed by moving furnishings from time to time to avoid uneven colour changes.
Full care guide available as a downloadable PDF above.
Warranty
- 25 years residential
- 10 years commercial
- Lifetime structural
