Description
Maxi Smooth Finish pairs low-maintenance hybrid flooring with the beauty of HD natural timber. Stanley carries that through in Sunstar’s Maxi Smooth Finish range, with warm tones and a modern feel.
A hybrid board, 7mm thick, with an ultra matte smooth finish and Unilin Click installation. It’s made by Sunstar Flooring, who supply the Maxi Smooth Finish range through Multifors.
Technical Specifications
| Thickness | 7mm |
|---|---|
| Board Dimensions | 230×1830 |
| Wear Layer | 0.5mm |
| Finish | Ultra Matte Smooth |
| Core Construction | SPC |
| Surface Coating | Ceramic |
| Installation Method | Unilin Click |
| AC / Wear Rating | AC4 Light Commercial |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P4 |
| Pattern Variations | 10 |
| Coverage per Box | 2.1sqm |
| Planks per Box | 5 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Kitchens and other moisture-prone areas — waterproof core per Sunstar’s product data
- Light commercial applications (AC4 Light Commercial)
- Anywhere suited to a Unilin Click installation
- Modern-styled interiors, especially in warm colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- No Caulking or Adhesives — Never caulk the floor or Use adhesive to fix trims to the flooring.
- Click System — The Unilin Click system is a glueless click system and it is not recommended any glue is used to join boards.
- Care should be taken if disengaging boards, and any damaged boards should not be reused.
- Underlay — Hybrid flooring includes an integrated underlay and foam based underlays should not be used under the flooring. Where improved acoustic controls are required rubber based underlays may be used but should be approved by Sunstar Timber Flooring prior to use.
- Unilin system locking process – Unilin locking system guide
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
The natural movement of the flooring in changing temperatures should be allowed for by the installer with small expansion gaps to the perimeter of the floor hidden under skirting boards or trims. Care after install should also be taken not to compromise that natural movement, never fix the flooring in place using adhesives such as caulking.
Also, never drill fixtures through the floor without allowing for floor movement.
It’s always important to keep a floor clean, minor dirt and grit can accelerate the wear of coatings.
Full care guide available as a downloadable PDF above.
Warranty
- Limited lifetime residential
- 10 years commercial
- Lifetime structural
