Description
Maintenance-friendly Hybrid Flooring that Captures the Essence of Timber Yuroke carries that through in Sunstar’s Maxi Hybrid range, with dark tones and a traditional feel.
A hybrid board, 7mm thick, with an embossed finish and Unilin Click installation. It’s made by Sunstar Flooring, who supply the Maxi Hybrid range through Multifors.
Behind the colour and finish, 908 Yuroke’s real numbers are what determine how it holds up in daily use — a 0.5mm wear layer, an AC4 Light Commercial rating, a 5 Star acoustic rating and P5 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on an SPC core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.1sqm across 5 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured. With 6 pattern variations across the boards, the floor avoids an obviously repeating look once laid across a larger area.
Technical Specifications
| Thickness | 7mm |
|---|---|
| Board Dimensions | 230×1830 |
| Wear Layer | 0.5mm |
| Finish | Embossed |
| Core Construction | SPC |
| Surface Coating | UV Cured |
| Installation Method | Unilin Click |
| AC / Wear Rating | AC4 Light Commercial |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P5 |
| Pattern Variations | 6 |
| Coverage per Box | 2.1sqm |
| Planks per Box | 5 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Kitchens and other areas where spills happen, thanks to the water-resistant core
- Light commercial applications (AC4 Light Commercial)
- Anywhere suited to a Unilin Click installation
- Traditional-styled interiors, especially in dark colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Mix & Stagger — Mix boards and stagger them for a pleasing design.
- Assess During Installation — Do not install faulty or damaged boards.
- Clean Surface — Ensure the subfloor is free of debris and structurally sound.
- Leveling — Limit rises and falls to a maximum of 3mm over a 1000mm radius. Smooth imperfections to ensure a maximum 1mm deviation over 250mm area.
- Unilin system locking process – Unilin locking system guide
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
The natural movement of the flooring in changing temperatures should be allowed for by the installer with small expansion gaps to the perimeter of the floor hidden under skirting boards or trims. Care after install should also be taken not to compromise that natural movement, never fix the flooring in place using adhesives such as caulking.
Also, never drill fixtures through the floor without allowing for floor movement.
It’s always important to keep a floor clean, minor dirt and grit can accelerate the wear of coatings.
Full care guide available as a downloadable PDF above.
Warranty
- Limited lifetime residential
- 10 years commercial
- Lifetime structural
