Description
Maintenance-friendly Hybrid Flooring that Captures the Essence of Timber Spotted Gum carries that through in Sunstar’s Maxi Hybrid range, with light tones and a traditional feel.
A hybrid board, 7mm thick, with an embossed finish and Unilin Click installation. It’s made by Sunstar Flooring, who supply the Maxi Hybrid range through Multifors.
Behind the colour and finish, 905 Spotted Gum’s real numbers are what determine how it holds up in daily use — a 0.5mm wear layer, an AC4 Light Commercial rating, a 5 Star acoustic rating and P5 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on an SPC core with UV Cured surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.1sqm across 5 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured. With 6 pattern variations across the boards, the floor avoids an obviously repeating look once laid across a larger area.
Technical Specifications
| Thickness | 7mm |
|---|---|
| Board Dimensions | 230×1830 |
| Wear Layer | 0.5mm |
| Finish | Embossed |
| Core Construction | SPC |
| Surface Coating | UV Cured |
| Installation Method | Unilin Click |
| AC / Wear Rating | AC4 Light Commercial |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P5 |
| Pattern Variations | 6 |
| Coverage per Box | 2.1sqm |
| Planks per Box | 5 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Kitchens and other areas where spills happen, thanks to the water-resistant core
- Light commercial applications (AC4 Light Commercial)
- Anywhere suited to a Unilin Click installation
- Traditional-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Ventilation & Humidity — Timber subfloors should be well ventilated and meet building regulations for humidity. Concrete subfloors should not exceed 4.8% moisture.
- Maximum Temperature — Never exceed 28°C.
- Pre-Installation: Run heating at desired temperature for at least: one week, then turn off and allow subfloor to cool for 2-3 days.
- Gradual Heating — Increase temperature by a maximum of 2°C per day. Maintain a constant temperature once running, with variations of no more than 2°C per day.
- Unilin system locking process – Unilin locking system guide
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Other coatings and more invasive steps are available and should be discussed with your flooring professional.
We will always strive to improve the processes from design to floor. Then once installed you have the opportunity to take over and look after your floor to ensure the longest lifespan. Whether you’re happy for it to age and develop more character to tell a story of your home, or you want to keep it as close as possible to a fresh floor, there’s some guidance to keep in mind:
The most dangerous time for a floor is move in day. Keep the floor clean as you move in.
Full care guide available as a downloadable PDF above.
Warranty
- Limited lifetime residential
- 10 years commercial
- Lifetime structural
