Loba Viva 1K

Description

Loba Viva is a water-based 1-component finish for wooden floors. For normal
to heavy traffic. Excellent for renovation.

Suitable for parquet and wooden floors.
For normal to heavy traffic residential areas and light commercial use.
Excellent for renovation due to powerful resistance to plasticizers
from parquet adhesives.

The surface must be professionally sanded. The floor must
be dry and free of any old coatings, oil, grease, wax, silicone,
sanding dust and other impurities.
The optimal processing conditions are room temperature +15°C
to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40%
to 75%, material temperature +18°C to + 25°C, max. wood
moisture 12%, sufficiently ventilate working rooms.
In order to prevent parquet damage, the room temperature
should be set to the annual average expected for the use of the
product.
To reduce the risk of excessive swelling, we recommend
applying a maximum of 2 roll applications per day.
Transfer material to a LOBA varnish bucket before applying.
Shake the contents well.
Observe general and, if necessary, product-specific occupational
health and safety regulations. Further information can be found in the GISCODE-
related operating instructions which are available under www.wingis-online.de.
This product is part of the LOBA and Wakol “Connected Systems”. The
approved combinations with Wakol parquet adhesives may be found in the
“Connected Systems” Matrix: www.loba.de/connected-systems

LOBA roller Deluxe 120 and LOBA roller Microfaser 100-120 /
100-120 ml(g)/m² = 8-10 m²/l(kg)

Able to recoat without intermediate sanding within the first 24
hours. After this time, an intermediate sanding is necessary.
An intermediate sanding before the last application will improve
the optical appearence of the surface.
Use LOBASAND perforated pad P120 or finer, alternatively Sanding
Net P120 or finer.
Carefully remove dust before overcoating.

Can be carefully walked on, intermediate sanding can be
performed and can be varnished over after no less than 4 hours.
Light use after 24 hours.
Full use and covering possible after 5 days.
The floor can be covered earlier by using LOBA Cover 400, for
details see the TI for the product.
Drying times are valid for +20°C and 50% relative humidity.

To minimise side bonding and to seal off wood constituents, e.g.
in exotic timber.

Additives

The range of application, properties and appearance can be
extended by combining with LOBA additives.
Please refer to the respective technical information of the
additives for possible combinations, detailed application information, and
drying times.

Seal only after the adhesive has set adequately.

Untreated natural cork:

Not recommended for recoating of old coverings or pre-finished cork, therefore
the product LOBA 2K Duo can be used, see TI for details.

Colouring Tip

To achieve a brightening/whitening effect on light-coloured
substrates, we recommend adding LOBA Whitener according to the technical
information of the product.
In order to minimise colour reactions with tannins, the first
layer of the paint must be applied to untreated cork in the delivery form
without colour additive.
Subsequent drying overnight is necessary.
To achieve a colour intensification on natural cork and brownish
and reddish coloured cork floors, we recommend adding LOBA Amberizer according
to the technical information of the product.