Description
The LOBA Spray Mop Kit is a practical mop with an integrated spray system, letting a floor be dampened and cleaned in one motion without a separate bucket or spray bottle. Operating without a battery or electricity, and using a pH-neutral, biodegradable cleaner concentrate, it’s built for regular maintenance cleaning of water-resistant floors — hardwood, laminate, cork, tile and stone, PVC, linoleum and rubber flooring.
Being free from microplastics, dyes, solvents and plasticizers matters most for finished hardwood and cork floors, where harsher chemical cleaners can cause softening, discolouration or damage to the surface finish over repeated use. The washable microfibre cover, cleaned at 60°C without softener, keeps ongoing running costs down compared with disposable cleaning pads.
Technical Specifications
| Formulation | Water-based, pH-neutral (pH 7 +/-), biodegradable |
|---|---|
| Operation | Integrated spray, no battery or electricity |
| Cleaning dilution | 50ml LOBA Cleaner Concentrate per 5L water |
| Intensive cleaning dilution | 250ml LOBA Cleaner Concentrate per 5L water |
| Mop cover | Washable microfibre, 60°C, no softener |
| Free from | Microplastics, dyes, solvents, plasticizers |
Where to Use
- Hardwood, laminate and cork floors
- Tile and stone floors
- PVC, linoleum, rubber and design flooring
- Regular maintenance cleaning of any water-resistant floor
How to Apply
- Fill the spray reservoir — mix LOBA Cleaner Concentrate with water at the standard or intensive dilution rate.
- Remove loose debris first — quickly clear dust, small stones and sand from the floor to prevent scratching during mopping.
- Spray and mop — use the integrated spray to dampen the floor as you mop, avoiding excess water.
- Wash the cover as needed — remove the microfibre cover and machine wash at 60°C without softener.
Important Notes
- Avoid using too much water when cleaning and caring for floors, to prevent swelling and discolouration.
- Mop up spilled liquids immediately to prevent dark spots forming on wood floors.
- Always read the cleaning and care instructions provided by the specific floor manufacturer before use.
Getting dilution right matters more than it might seem for a finished timber floor specifically: too concentrated a mix can leave a residue that dulls the finish over repeated cleanings, while too dilute a mix under-cleans and can require more passes, each one adding moisture exposure the floor doesn’t need. The Spray Mop’s built-in reservoir and standard dilution guidance take the guesswork out of getting that ratio right on every clean, rather than eyeballing a bucket mix each time. Following the stated dilution each time keeps results consistent clean after clean.
