Loba EasyFill Water Based Binder

Description

Loba EasyFill Water Based Binder – 5 Litres

Loba EasyFill is a Water-based binder. It’s The newest generation of
Water-based fillers. Loba EasyFill fills larger gaps in one
application. It has exceptional filling ability, is fast drying and
provides for fast sandability, which in total leads to significant
time savings.

Product Advantages

• Easy to work with
• Closes even wider joints by one-time application
• No subsiding of the filler in the joint
• Very fast drying
• Excellent sandability; clearly visible and low adhesion on
  sanding paper
• Excellent color scheme for oiled and finished surfaces
• Applicable to all common European and exotic wood types
• Odor neutral Easy 1K system combined with 2K performance

Range of Uses

• For closing joints and small areas of damage to bonded parquet and hardwood floors.
• Old flooring with outsized and dirty joints, as well as wooden constructions involving nailed or screwed hardwood floors, are not generally treated with putty, as the dried putty will break out at least in some parts.

APPLICATION

• The surface must be professionally sanded. The floor must
  be dry and free of any old coatings, oil, grease, wax, silicone,
  sanding dust and other impurities.
• The optimal processing conditions are room temperature +15°C
  to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40%
  to 75%, material temperature +18°C to + 25°C, max. wood
  moisture 12%, sufficiently ventilate working rooms.
• In order to prevent parquet damage, the room temperature
  should be set to the annual average expected for the use of the
  product.
• Shake the contents well.
• Observe general and, if necessary, product-specific occupational
  health and safety regulations. Further information can be
  found in the GISCODE-related operating instructions which are
  available under www.wingis-online.de.

THINNER / MIXING:

• The product is ready for use and must not be reduced!

APPLICATION TOOL / APPLICATION RATE:

• LOBA trowel / approx. 100ml/m² (10 m²/l). Application rate may
  vary depending on the joints width.

DRYING TIME:

• For fine joints, sand after no less than 15 minutes.
• For renovations with extremely large joints, allow to dry
  overnight.
• Rework with the recommended surface treatment systems after
  no less than 60 minutes.

SYSTEMS SUITABLE FOR SURFACE TREATMENT::

• All LOBA finish and oil systems.

APPLICATION:

• After the medium sand (e.g. 60 grain) and before the fine sand
  (e.g. 100 grain).
• Mix the product with the finest wooden sanding dust as
  possible for the type of wood in question to form a paste-like,
  silky putty.
• The finer the sawdust used, the easier the putty will be to apply
  and therefore the better its adhesion to the joint.
• The entire floor is scraped off before the fine sanding stage.
• For larger joints or damage, repeat the process after drying.
• Carefully remove the remainder from the surface.
• Completely sand away (fine sanding) any putty remaining on
  the surface after drying.
• Tip: A perfect color result is achieved at a mixing ratio of 1:10 by weight (sanding dust content to binder).

COLOURING OF DARK WOOD SPECIES:

• The coloring of dark woods can be improved by adding Mixol universal tinting paint.
• Pour 5 litres of LOBA EasyFill into a bucket,
  add 200 ml of MIXOL and stir with a paint mixer to a uniform con-
  sistency.
• In order to avoid colour deviations, always mix sufficient
  mass for a continuous surface.

Mixol Dark Brown 23

• For dark wood types like: smoked oak, wenge, pangapanga

Mixol Chestnut 20

• For reddish wood species such as: jatoba, merbau, mahogany
• Further tips for the described application can be found in the
  TTT “Filling of dark or reddish woods”.