Description
Environex Maestro is a disinfecting agent and stain remover built to treat the moss, mould, tannin, animal and leaf staining that commonly builds up on masonry pavers, walls and timber surfaces over time. Containing 12.5% weight-to-volume available chlorine, it doesn’t just lift visible staining but genuinely kills the spores responsible for moss and mould, addressing the underlying cause of regrowth rather than just the surface symptom.
Application is straightforward: diluted at 1 part Maestro to 5 parts water, it’s poured directly onto affected masonry pavers or applied with a mist spray container to vertical masonry walls, then left to soak in for around 30 minutes before being hosed off. A stiff brush or deck broom helps lift the remains of treated mould, and a repeat treatment is recommended where a total kill is needed on heavily affected areas.
Because it’s a genuine disinfectant rather than just a cosmetic cleaner, it addresses moss and mould at the spore level, which is what gives it real staying power against regrowth compared with a purely cosmetic stain remover. Sealing the treated area once it’s thoroughly dry is recommended for easier ongoing maintenance and to help resist future staining.
Because Maestro treats the root cause rather than just masking discolouration, it’s a genuinely more durable solution for outdoor masonry and timber than a purely cosmetic cleaner, which typically leaves the underlying moss or mould spores intact and regrowth following within weeks. Its concentrated 5-litre packaging also makes it economical for larger paved areas or extensive masonry walls where diluted product needs to stretch across real square metreage.
Technical Specifications
| Available chlorine | 12.5% w/v |
|---|---|
| Dilution ratio | 1 part Maestro to 5 parts water |
| Soak time | Approx. 30 minutes |
| Packaging | 5 litre containers |
Where to Use
- Masonry pavers and walls affected by moss or mould
- Timber surfaces with tannin, animal or leaf staining
- Outdoor areas requiring disinfection ahead of resealing
How to Apply
- Dilute the product — 1 part Maestro to 5 parts water.
- Test first — apply to a small inconspicuous area and check for adverse reactions.
- Apply to the surface — pour onto pavers or mist spray onto walls.
- Allow to soak — leave for approximately 30 minutes.
- Hose off and brush — use a stiff brush or deck broom to remove residual mould, repeating if needed.
Important Notes
- Avoid contact with skin and eyes, and avoid breathing vapour or spray mist.
- Do not mix with other chlorinating compounds, acids, oxidizing agents or organic materials.
- Ensure the area is thoroughly dry before applying a sealer.
