Description
The authentic charm of real timber, in the convenience of a luxury vinyl plank. Riverbank brings that into Sunstar’s Oatlands range, with light tones and a modern feel.
An LVP board, 2mm thick, with a matte finish and Direct Stick installation. It’s made by Sunstar Flooring, who supply the Oatlands range through Multifors.
Behind the colour and finish, OAT2810 Riverbank’s real numbers are what determine how it holds up in daily use — a 0.3mm wear layer, a 5 Star acoustic rating and P4 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on a PVC Core core with PUR Coating surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 3.671 m² across 16 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 2mm |
|---|---|
| Board Dimensions | 187×1227 |
| Wear Layer | 0.3mm |
| Finish | Matte |
| Core Construction | PVC Core |
| Surface Coating | PUR Coating |
| Installation Method | Direct Stick |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P4 |
| Coverage per Box | 3.671 m² |
| Planks per Box | 16 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Anywhere suited to a Direct Stick installation
- Modern-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Sunstar’s Direct stick vinyl products should only be installed using a direct stick method. Ensuring that all the correct precautions and procedures are followed to insure correct installation.
- Trowel — 1.6mm V-Notch Trowel should be used to spread Hard-set adhesive onto subfloor.
- Roller — 45 Kg hand roller should be used to press and roll out freshly laid planks to ensure proper adhesion. Making sure to roll in both directions for thorough adhesion.
- Storage — Material should be removed from packaging for at least 24 hours prior to installation and allowed to acclimatize on installation site. Material should be rested on a flat surface and is allowed to be stacked 500mm tall and at least 100mm away from each stack of flooring.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
The most dangerous time for a floor is move in day. Keep the floor clean as you move in.
Take care when moving particularly when using trolleys, only ever use a trolley with inflatable tyres and use floor protection to avoid direct contact with the floor.
Never drag heavy furnishings or appliances, take extra care when moving the fridge and other appliances in, the edges are sharp and even the wheels can cause damage if they’re not clean or in good condition.
Full care guide available as a downloadable PDF above.
Warranty
- 20 years residential
- 5 years commercial
- Lifetime structural
