Description
Adare laminate flooring is designed for homes that want a bold, larger-than-life look. That’s the character behind Mother of Pearl, from Sunstar’s Adare range, with light tones and a contemporary feel.
A laminate board, 12mm thick, with a super matte finish and Uniclic installation. It’s made by Sunstar Flooring, who supply the Adare range through Multifors.
Behind the colour and finish, ADA129 Mother of Pearl’s real numbers are what determine how it holds up in daily use — an AC4 Light Commercial rating, a 5 Star acoustic rating and P2 slip resistance together give a genuine read on performance rather than just first impressions. Underneath, it’s built on an Ultra HDF Core core with Aluminium Oxide – 72 Hour Water Resistant Surface surface protection, a combination that’s what keeps a floor like this performing consistently from the first box to the last rather than varying noticeably across a larger room. Each box covers 2.13 m² across 5 planks, making it straightforward to work out how many boxes a given room actually needs once its area is measured.
Technical Specifications
| Thickness | 12mm |
|---|---|
| Board Dimensions | 194×2200 |
| Finish | Super Matte |
| Core Construction | Ultra HDF Core |
| Surface Coating | Aluminium Oxide – 72 Hour Water Resistant Surface |
| Installation Method | Uniclic |
| AC / Wear Rating | AC4 Light Commercial |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P2 |
| Coverage per Box | 2.13 m² |
| Planks per Box | 5 Planks |
Where to Use
- Residential living areas and light commercial spaces
- Light commercial applications (AC4 Light Commercial)
- Anywhere suited to a Uniclic installation
- Contemporary-styled interiors, especially in light colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Click System — Products with a click system are glueless and it is not recommend any adhesive is applied to the joins.
- Evaporative Cooling — Should not be used during installation. Expansion gaps may be reduced with care: Adhesive takes up to 30days to fully cure and bond.
- To reduce expansion gaps the following steps must be taken:
- Acclimatized timber in boxes in for 48hours in the room prior to installation.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Multi-purpose cleaners should not be used on floors.
In the event of minor damage there’s a few steps that you can take.
Stains and marks — Stubborn stains can be removed with care using methylated spirits on a damp cloth. After removing clean all the methylated spirits from the surface using a fresh damp cloth.
Full care guide available as a downloadable PDF above.
Warranty
- 25 years residential
- 5 years commercial
- Lifetime structural
