Description
A herringbone take on Le Parquet’s curated European Oak palette — a geometric pattern with a real sense of history and movement. Corbara-Herringbone carries that through in Sunstar’s Le Parquet Herringbone range, with dark tones and an industrial feel.
A European Oak timber board, 15mm thick, with a light brush matte finish and Tongue & Groove L+R installation. It’s made by Sunstar Flooring, who supply the Le Parquet Herringbone range through Multifors.
Technical Specifications
| Thickness | 15mm |
|---|---|
| Board Dimensions | 150×750 |
| Wear Layer | 4mm |
| Finish | Light Brush Matte |
| Species | European Oak |
| Core Construction | Multi-Ply Engineered Core |
| Surface Coating | UV Cured |
| Installation Method | Tongue & Groove L+R |
| Acoustic Rating | 5 Star |
| Fire Rating | Certificates Available |
| Slip Rating | P3 |
| Coverage per Box | 2.025 m² |
| Planks per Box | 18 Planks |
Where to Use
- Residential living areas, bedrooms and hallways
- Anywhere suited to a Tongue & Groove L+R installation
- Industrial-styled interiors, especially in dark colour schemes
How to Install
Installation should be completed by suitably qualified trades and must adhere to any relevant NCC & building requirements.
- Leveling — Limit rises and falls to a maximum of 3mm over a 1000mm radius. Smooth imperfections to ensure a maximum 1mm deviation over 250mm area.
- Ventilation & Humidity — Timber subfloors should be well ventilated and meet building regulations for humidity. Concrete subfloors should not exceed 4.8% moisture.
- Floating Floor — Use a 2-3mm foam underlay with a taped moisture barrier, or a 3-10mm rubber underlay as needed.
- Direct Stick — Follow adhesive supplier guidelines to form suitable moisture barrier depending on subfloor. Different Adhesives require different steps.
Full installation instructions available as a downloadable PDF above.
Care & Maintenance
Tables, chairs, and sofas are often moved back and forth with extreme point loads that can lead to accelerated wear and tear of the coatings or scratching in localised areas. Under legs use felt pads, rugs can also be used in some locations where style can meet practicality, making sure to avoid rugs with rubber backings as these can cause staining.
Even furnishings that aren’t moved often should have a suitable no scratch surface in contact with the flooring.
Under desk chairs or other wheeled furnishings use a non- staining mat and rubber casters. Although be aware rubber will cause staining to the surface of the floor over time, so again select mats without rubber backing.
Full care guide available as a downloadable PDF above.
Warranty
- 25 years residential
- 5 years commercial
- Lifetime structural
