Description
Max Bond 006 Sports Surface Adhesive
– 20 Litre Pail
Max Bond 006 Sports Surface Adhesive is a solvent based synthetic grass and
external sports surface adhesive for outdoor application. With excellent early
bond strength, it prevents edge curling and resists water and weather
deterioration.
Recommended For:
- Non stretch open weave polypropylene backed synthetic grass
- Needle punch polypropylene carpet
- Suitable for use over concrete, exterior grade timber, cured asphalt and paved surfaces
Surface Preparation:
- All phases of the installation should comply with the current
Australian Standard AS1884 & AS2455. - The subfloor must be clean, structurally sound, dry and free from all
contaminants, which will inhibit good adhesion – this includes previously used
adhesive and floorcoverings, polishes, paint, waterproofing membranes, concrete
curing agents and laitance (laitance being the dusty unstable toppings of poorly
or insufficiently cured concrete). - Deep indentations and cracks should be treated with the appropriate
cementitious screed in accordance with manufacturer’s instructions
Coverage:
- Approximately 1.6m² / litre when adhesive is evenly spread with a 3.2mm
V-notch trowel
Application:
- Apply adhesive using a ‘V’ notched trowel spreader.
- Dimensions of notchings should be such as to provide a minimum (80%)
coverage of adhesive to the back of the floorcovering. - As most synthetic grass and fibre bonded carpets have highly textured
backings, a deep 3.2mm to a 6mm ‘V’ notching is strongly recommended. - For hard to hold carpet, or when installing over low absorbent
substrates, it is necessary to allow a longer tack up time. - Always check & ensure good transfer of adhesive to the back of the
carpet. - Roll within 1 hour of laying.
- Do not use in rain or if rain is expected during or immediately after
laying. - Do not allow heavy traffic within 24 hours if installation.
- Refer to AS/NZS2455.1-2007 “Textile Floor Coverings – Installation
Practice” for further preparation and installation details.
Clean Up:
- Trowels and other tools may be cleaned with MAX BOND SC Solvent
Cleaner
Shelf Life:
- 12 months in unopened containers stored out of direct sunlight,
undercover and away from all sources of heat and ignition
Storage:
- This product is classified UN 1133 D.G. Class 3 – Hazchem 3 and is
HIGHLY FLAMMABLE. - This product should be stored accordingly and in line with correct
regulations.
Supplier Code:
- M006
Technical Data:
- Appearance: Coloured paste
- Solids: Approx. 55%
- Base Polymer: Synthetic Rubber
- Carrier: Organic Solvent
- Flammability: Highly Flammable
- Container Sizes: 1, 4 and 20 Litre Metal Pail
Note: Always carry out your own test to confirm suitability of this product
with your application. Additional information on physical properties, health
hazards, storage, handling and transport is available in the Material Safety Data
Sheet (MSDS), available on MJS website.
