Description
Loba Deck and Teak Oil – 2.5, 5 and 10 Litres
.
Bring out the natural beauty of your patio! Loba Deck and Teak Oil is a vegetable
oil based impregnation for wooden surfaces in outdoor areas. Accentuates the
nativeness of the wood and sets exciting color accents. Protect your wooden terrace
and garden furniture from wind and weather! LOBA Deck and Teak Oil is based on
vegetable oils and offers effective deep protection.
Product Advantages
- Protects against temporary surface moisture
- Good penetration behaviour
- Easy and safe application
- Also suitable for impregnation of garden furniture
- Applicable on smooth and grooved planks
- The preceding use of LOBA DeckPrepare increases durability
- Suitable for children’s toys as per EN 71-3
Recommended Uses
- Suitable for wooden decks, patios, garden furniture and other objects
made from wood that are used outdoors. - Suitable for children’s toys, as the requirements of DIN EN 71-3 –
“Migration of certain elements” are met. - Anti-slip as per DIN 51097 evaluation group B and DIN EN 16165:2021-12
evaluation group R10
Application
- Optimum processing conditions at +15°C to +25°C, relative humidity 40%
to 75%, material temperature +15°C to +25°C - Do not apply to surfaces exposed to hot or strong sunlight, as the
applied coating may dry too quickly. Do not apply if rain is expected within 3 hours
of application. - If in doubt, create a test area to determine compatibility, adhesion and
appearance. The results may vary depending on the type of wood, especially with
oily, colour- intensive and resinous woods. - Shake the contents well.
- Transfer material to a LOBA varnish bucket before applying. Avoid drops
falling on the surface, smooth out any drops directly with a brush. - Observe general and, if necessary, product-specific occupational
health and safety regulations. Further information can be found in the GISCODE-
related operating instructions which are available under www.wingis-online.de.
MIXING
- The product is ready for use and must not be reduced!
APPLICATION TOOL/RATE:
- LOBA oil brush, paintbrush, non-fluffy cloth / 80-120ml/m² per
application. - The actual material consumption depends on the type of wood, the wood
moisture and the weathering condition of the surface; if necessary, the actual
consumption must be determined by a trial application. - Optimum impregnation/protective effects are only ensured when fibre
saturation (maximum oil absorption of the wood) is reached. Several applications may
be necessary.
DRYING TIME
- approx. 12 hours.
PREPARATION
- Remove any dirt, moss or old paint beforehand if required.
- Newly installed, largely closed-pore timbers are often unable to absorb
adequate quantities of oil, so therefore the pores will first have to be “opened”.
Please find the recommended preparation in our technical information of LOBA
DeckDegrayer. - Apply LOBA DeckOil evenly using a brush, LOBA Oil-brush or non-linting
cloth in the direction of the grain. - After leaving to work for around 30 minutes, completely remove any un-
absorbed oil using non-linting cloth. A single-disc machine with LOBASAND SpecialPad
beige can be used optionally. - For wooden furniture, especially seating, rub until virtually dry using
absorbent towels. - If necessary, after drying overnight, apply another layer of oil.
- Excess material must be completely removed during equalisation.
- Drying delays are possible on some exotic timbers.
- Keep soaked cloths, pads and other tools in closed containers.
- Moisten oil in combination with sanding dust, fabric cloths and so on
with water or store in a sealable bucket and dispose of in a fire-safe manner, since
otherwise there is a risk of self-ignition.
PROCESSING
