Name: Megapoxy HT Hydrophylic Epoxy Gel Adhesive
Price: 155 AUD

Description

Megapoxy HT Hydrophylic Epoxy Gel Adhesive

Megapoxy HT Hydrophylic Epoxy Gel Adhesive:

is a 100% solids, resin based, solvent-free, hydrophilic epoxy gel
adhesive.
is resistant to hydrogen sulphide that may be present in pipes and
plants used for treatment of sewage.
has excellent static and dynamic mechanical properties, and can be used
with the fine aggregates to make high strength epoxy mortar.
can be used for wet to dry concrete adhesive. Repairs of cracked
concrete, underwater and splashzone repairs.
Megapoxy HT Hydrophylic Epoxy Gel Adhesive is volatile organic
compounds free (Nil V.O.C.)

Megapoxy HT Hydrophylic Epoxy Gel Adhesive is a gel-style, hydrophilic
epoxy resin for many types of bonding and filling applications. It is suitable for
repairs to damp and wet surfaces and is available in conveniently pre-packaged 4
litre and 20 litre kits with a 3:1 mix ratio.
It has a 30-minute work time and a 24-hour cure at 25ºC.

Before you begin mixing, you need to ensure that all contact surfaces
like metal, concrete and stone are clean and clear of oil, dust and any other
surface contaminants.
Concrete and stone surfaces should be prepared by grinding the surface
and removing all the dust and debris. This helps ensure effective bonding contact.
Compressed air can be used to remove dust from cracks and holes, clean
metal surfaces with acetone to remove any oils or contaminants.

Megapoxy HT Hydrophylic Epoxy Gel Adhesive is VOC-free.
As with all epoxy resins, please wear appropriate PPE, including
eyewear gloves and clothing.

IMPORTANT. Only make a suitable quantity that can be used within the 30-
minute work time!

Additional batches can be mixed after the previous is mixed and
applied, even as it cures.
The recommended mixing time for Megapoxy HT Hydrophylic Epoxy Gel
Adhesive is 3 minutes. Mix first for 2 minutes, before scraping the sides and then
mix for another one minute until the product is completely mixed.
Part A is a thick gel, while Part B is a clear liquid. The best way to
ensure the correct ratio is to pack Part A into a measuring tub with a spatula,
ensuring there are no air pockets and that you are packing the correct amount.
Once packed, place this amount into the mixing tub and repeat as
necessary until you have measured out all the Part A you want to mix.
Using another measuring tub of the same size, pour out the correct
amount for Part B and add to the mixing container.
Set a timer for 2 minutes.
Begin slowly mixing by placing a flat spatula into the mix (to the base
of the tub) and slowly stir. Take care not to splash as you mix. The two parts are
still visibly streaky until combined. Ensure you scrape around the base and corners
to gather all the un-mixed epoxy and continue to mix.
After 2 minutes scrape any un-mixed product off the sides of the
container and the spatula before mixing again for a further one minute (set timer). After the one minute is complete the Megapoxy HT should appear as a streak-free,
soft gel that’s ready for use.

Megapoxy HT Hydrophylic Epoxy Gel Adhesive is recommended for filling
and repairs for wet-to-dry and new-to-old concrete bonding; concrete cracks;
grouting of bolts; and underwater or splash zone structures and surfaces.
Mixed 1:1 with dry sand, Megapoxy HT is ideal for high built epoxy
mortar.
Megapoxy HT will cure even in cold or damp conditions, stronger than
concrete with good chemical resistance. It can be applied by trowel or gunned using
a standard 300 mm cartridge, a caulking gun or a caterer’s piping bag.
To load the caulking gun, trowel the combined epoxy onto a sheet of A4
paper. Roll up the paper narrow enough to place into the gun cylinder and seal
before use.
Surfaces can be smoothed by wetting a clean trowel blade with Megapoxy
Thinners and gliding it over the surface. Be sure to re-wet the blade frequently to
prevent the epoxy gripping.

Uncured Megapoxy HT Hydrophylic Epoxy Gel Adhesive can be cleaned with
Megapoxy Thinners.
Please Dispose of contents and container in accordance with local,
regional, national and international regulations.

Once cured, Megapoxy HT Hydrophylic Epoxy Gel Adhesive has a high
compressive strength, but it can be ground sanded and shaped easily with power
tools to give a smooth surface finish.
For further technical information, refer to TDS.