Description

Dy-Mark Protech Multi-Purpose Lubricant – 400g

General

Dy-Mark Protech Multi-Purpose Lubricant is a multi use product that penetrates, lubricates, protects and displaces moisture. It has hundreds of uses on the job, around the home, garden or garage.
SILICONE FREE FORMULA
Dy-Mark Protech Multi-Purpose Lubricant incorporates patented 2-way actuator with locking tab. Uses a 360° valve for upright inverted applications.

Directions For Use

Recommended Uses::

Penetrates fast to breakaway rust and corrosion, freeing rusted parts. Ideal for nuts, bolts, taps, pipe fittings, valves and other uses.
Lubricates to restore working parts and to stop squeaks. Ideal for bikes, hinges, locks, garden tools and other uses.
Protects against rust and corrosion on all metal surfaces. Ideal for hinges, tools, dies, garden equipment, sporting equipment and other uses.
Displaces moisture with a micro thin continuous film. Ideal for distributors, starter motors, spark plugs and leads, electrical connections and other uses.

Ideal Application:

De-activate and isolate equipment before use.Shake can well.
Shake can occasionally during use.
360 degree valve enables spraying in upright and inverted positions.
Spray liberal coating directly on to corroded surfaces, saturating the problem area.
Spray light even coat to protect surfaces and seal out moisture.
Use extension tube for hard to reach areas.
Repeat application if necessary.
When finished spraying, actuator can be set in lock position to prevent accidental actuation.

Before Spraying:

Shake can for at least 45 seconds AFTER the mixing ball begins to rattle.
Shake can occasionally during use.

Technical Data

Size: 400g Aerosol
Colours: Light Amber
Consistency: Liquid
Propellant: Hydrocarbon

Storage

Protect from sunlight.
Do not expose to temperatures exceeding 50ºC

Disposal

Pressurised container:

Do not pierce or burn, even after use.
Aerosol should be completely emptied prior to disposal.
Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use.
Safety data sheets are also available from the dymark website at www.dymark.com.au

Disclaimer

The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.