Description
Davco Powder Mastic Tile Adhesive
- Davco Powder Mastic Tile Adhesive is a flexible cement-based tile adhesive ideal for large format and rectified edge tiles and featuring our Dust Less Technology.
- Suitable for interior and exterior applications.
- Commercial and domestic walls and floors.
FEATURES & BENEFITS OF Davco Powder Mastic Tile Adhesive
• Commercial grade
• Dust Less Technology
• Non-vertical slump for easy wall tiling
• Use for thick or thin bed tiling
• Extended open time for tiling large areas
• White formulation ideal for light coloured tiles and stone
PACKAGING
Available in a 20kg bag
WHERE TO USE Davco Powder Mastic Tile Adhesive
Surfaces
Most common substrates; building boards including compressed and fibre cement sheet, fully cured concrete, screed (cured for 7 days), rendered brickwork and blockwork, Davco waterproofing membranes and acoustic underlays.
Tiles
Ideal for large format and rectified (square) edge tiles, porcelain, ceramic, mosaic and marble tiles.
Areas
Suitable for interior and exterior applications. Commercial and domestic walls and floors including high foot traffic locations, bathrooms, showers, kitchens, laundries, living rooms, balconies and patios.
PRODUCT INFORMATION
AS ISO 13007 Classification: C1S1TE
VOC Content: Low VOC – 7g/L (SCAQMD method 304-91)
Coverage: 20kg bag of Davco Powder Mastic covers approximately 7m2 (based on a 10mm notch trowel)
Set Time: 24 hours before grouting
SURFACE PREPARATION:
• All surfaces must be installed according to manufacturer’s instructions and relevant Australian Standard(s) and be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds, release agents and any other loose or contaminating material. Thoroughly clean old surfaces, or new surfaces that have been treated, prior to tiling
• Deeply contaminated surfaces must be scabbled / abraded to a clean, sound surface. Expose at least 80% of the original substrate of painted surfaces
PRECAUTIONS
Safety
• SDS is available from www.davcoaustralia.com.au
• It is recommended that applicators wear PVC or similar gloves and safety goggles while handling this product
• Keep out of reach of children. If eye contact occurs, rinse with cool water
General
• Movement joints must be installed as stipulated in AS3958, “Guide to the Installation of Ceramic Tiles.” Failure to do so may result in drummy or lifting tiles
• Do not apply in temperatures above 35°C or below 5°C
• In cool and / or humid conditions, allow longer setting times
• Do not allow the adhesive to skin prior to laying the tiles. If the adhesive skins remove and dispose of it, then re-apply fresh adhesive
Specific
• Not suitable for tiling over existing ceramic tiles – use Davco SMP Evo
• Not suitable for moisture sensitive stone – use Davco 2 Part Rapid
• For other uses not mentioned in these instructions, please visit www.davcoaustralia.com.auTECH
