Description
Soudal Expanding Foam Genius Gun
– 500ml and 750ml Cartridges
Soudal’s gap‑filling expanding foam is a one‑component polyurethane foam that cures in contact with moisture. It’s designed to fill gaps, holes, and joints, and provides both insulation and draft control. Ideal for sealing gaps around window and door frames, pipe penetrations, and other spaces where air or sound leakage may occur.
Properties
Soudal Expanding Foam Genius Gun Provides:
- Excellent stability (no shrinkage or post- expansion)
- High filling capacity
- Good adhesion on all surfaces (except PE, PP and PTFE).
- High insulation value, thermal and acoustic
- Very good bonding properties.
- Elastic and compressible.
- Freon free (not harmless to ozone layer and greenhouse effect)
- Easy to dose
- Fast curing
- Very precise to dose
- Not UV-resistant
Application
Soudal Expanding Foam Genius Gun is suitable for:
- Insulating around pipes and electrical wiring.
- All foam applications in static and not static joints.
- Filling of cavities.
- Sealing of all openings in roof constructions.
- Apply of a sound absorbing layer.
- Improving thermal isolation in cooling systems.
Packaging
- Colour: champagne
- Packaging: 500 ml and 750 ml aerosol (net)
Shelf life
- Soudal Expanding Foam Genius Gun has a shelf-life of 18 months unopened and stored in dry and cool conditions (Between 5 and 25 °C), Upright storage is recommended.
Application method
- Shake the Soudal Expanding Foam Genius Gun aerosol can for at least 20 seconds.
- Open the cover and fold the tube horizontally.
- Surface should be free from grease and dust.
- Moisten surfaces with a water sprayer prior to application.
- For non-conventional substrates a preliminary adhesion test is recommended.
- Fill holes and cavities for 1/3, as the foam will expand.
- Repeat shaking regularly during application.
- If you have to work in layers repeat moistening after each layer.
- Fresh foam can be removed using Soudal Gun and Foamcleaner or acetone.
- Cured foam can only be removed mechanically or with Soudal PU-Remover.
- For storage: detach the bung, close nozzle with bung, close the cap and store can upright.
- Can temperature: +5 °C – 30 °C
- Ambient temperature: +5 °C – 30 °C.
- Surface temperature: +5 °C – 35 °C
Health and Safety Recommendations
- Take the usual labour hygiene into account.
- Always wear gloves and goggles.
- Remove cured foam mechanically.
- Never burn away.
- Consult label and material safety data sheet for more information. When vaporizing (for example with a compressor), additional security measures will be required.
- Use only in well ventilated areas.
Remarks
- Slightly moistening of the surface in hollow spaces optimizes curing, good adhesion and yield.
