Description
Megapoxy Thinners is a purpose-formulated blend of ethanol and xylene, specifically designed for thinning epoxy resins and coatings to achieve the correct application consistency, and for cleaning tools and equipment after epoxy work. Being purpose-built for epoxy systems, it thins reliably without disrupting the epoxy’s cure chemistry the way an incompatible general-purpose solvent might.
Its cleaning role is just as important as its thinning function on a real job — epoxy tools and equipment need thorough solvent cleaning before the product cures on them, and Megapoxy Thinners is formulated to do that effectively while remaining compatible with the Megapoxy epoxy range it’s designed to support. As a genuine dangerous good with a flash point of just 27°C, it demands the same handling discipline as any highly flammable solvent: adequate ventilation, non-sparking tools and elimination of ignition sources throughout use.
Because it’s classified as Dangerous Goods under the Australian Code for the Transport of Dangerous Goods by Road & Rail, it should be stored in a cool, dry, well-ventilated place away from ignition sources with containers kept tightly closed between uses, and full PPE — nitrile gloves, safety glasses and a respirator — used throughout handling and application.
Because getting epoxy consistency right the first time avoids costly rework, having a purpose-matched thinner on hand — rather than reaching for a generic solvent that may not be fully compatible with the specific epoxy chemistry — protects both the final cured result and the tools used to apply it. Its dual role in both thinning and clean-up also means one product covers the full epoxy workflow from mixing through to tool care.
Technical Specifications
| Composition | Blend of ethanol and xylene |
|---|---|
| Flash point | 27°C |
| Boiling point | 138°C |
| Classification | Dangerous Goods (flammable liquid) |
| Packaging | 4 litre drum |
Where to Use
- Thinning epoxy resins and coatings before application
- Surface preparation ahead of applying epoxy
- Cleaning tools and equipment after epoxy work
How to Apply
- Ensure adequate ventilation — set up in a well-ventilated work area before opening the drum.
- Wear appropriate PPE — nitrile gloves, safety glasses and a respirator.
- Add in small increments — to the epoxy product until the desired consistency is achieved.
- Use non-sparking tools — for mixing, given the product’s flammability.
- Clean tools by soaking or wiping — with a cloth dampened in the thinner.
Important Notes
- Highly flammable — keep away from all ignition sources.
- Ground and bond containers to prevent static discharge.
- Store in a cool, dry, well-ventilated place away from heat sources.
