Description
Loba SlipResist Additive – 100g
Loba SlipResist Additive improves anti-slip properties. LOBA SlipResist
achieves certified slip resistance of the surface by addition in the final finish
layer, thus extending the application range of the finishes and at the same time
reducing the effort for stock-keeping.
Product Advantages
- Certified slip resistance
- Additive has no negative effects on the soiling behavior
- Water-based technology, solvent-free
- Simple and safe application
- Simplified storage
Range of Uses
- Perfectly adjusted for water-based LOBA finishes.
Application
- Shake the contents well.
- Observe general and, if necessary, product-specific occupational health and safety regulations.
- Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.
Mix in:
- Shake up LOBA SlipResist and finish.
- In the case of 2K finishes, mix in before the hardener, so that it is possible to mix only the required material with the partial quantity measuring cup with hardener.
- Mass with additive has a storage stability of 14 days.
- Add one container of 100 g to 5 l/kg of finish.
- Attention: In order to ensure the decorative slide properties, the additive quantities must be exactly observed.
- Shake or stir in thoroughly (also possible by machine with a LOBA paint mixer).
- Process 2K finish mixed with LOBA SlipResist within the specified processing time. Longer stability is not guaranteed.
Suitability:
- Can be combined with approved finishes.
- The processing properties of the finish, their product combinability and drying time remain unchanged.
- Please observe the technical information of the corresponding finish.
Suitable product combinations
Achieves slip resistance according to DIN EN 16165:2021-12
Rating group R10 with the following finishes:
- 2K Supra A.T. satin
- 2K Supra A.T. semi-gloss
- 2K Duo extra-matte
- 2K Duo satin
- 2K Duo semi-gloss
- 2K Fusion satin
- 2K Fusion semi-gloss
- 2K Drive extra-matte
- EasyFinish satin
- EasyFinish semi-gloss
- EasyFinish Neo satin
- EasyFinish Neo semi-gloss
- Speed satin
- Speed semi-gloss
Rating group R11 with the following finishes:
- 2K UltraElastic extra-matte
- 2K InvisibleProtect
- To achieve an R11 surface with 2K InvisibleProtect in combination with SlipResist, a 3 coat application is required. The first coat can also be replaced by a primer.
