Description
Kit-Kat gets its finger mosaic look from a single porcelain piece rather than individual strips. Each 115x231mm tile has a finger relief decorated with pre-cuts, and grouting those pre-cuts completes the pattern. Dune Kit Kat Mosaic Tile in Snow Gloss Finish applies that format to a clean white gloss glaze, 8mm thick.
The Dune datasheet for code 188862 lists water absorption of E ≤ 0.5%, breaking strength beyond 35 N/mm², a stain resistance result of 5 and passes for frost and crazing resistance.
Technical Specifications
| Format | 11.5×23.1cm (115x231mm) |
|---|---|
| Thickness | 8mm |
| Finish | Gloss (Snow) |
| Material | Porcelain |
| Faces (graphic variation) | 6 |
| Shade variation | V1 |
| Water absorption (UNE EN ISO 10545-3) | E ≤ 0.5% |
| Chemical resistance (UNE EN ISO 10545-13) | LA |
| Chemical resistance, swimming pool (UNE EN ISO 10545-13) | A |
| Scratch hardness (UNE EN 67-101) | 5 |
| Crazing resistance (UNE EN ISO 10545-11) | Pass |
| Resistance to stains (UNE EN ISO 10545-14) | 5 |
| Breaking strength (UNE EN ISO 10545-4:9) | > 35 N/mm² |
| Frost resistance (UNE EN ISO 10545-12) | Pass |
| Slip resistance | Not listed on the datasheet |
| Pieces per m² | 37.64 |
| Pieces per box | 24 |
| Coverage per box (m²) | 0.64 |
| Weight per box (kg) | 10.94 |
Where to Use
- Kitchen splashbacks and butler’s pantry walls
- Shower walls and bathroom feature walls, in line with Dune’s shower wall tick
- Outdoor decorative walls, ticked on the datasheet icons
- Walls in steamy spaces, which Dune ticks as high condensation areas
- Pool walls as a Dune marked use, never pool floors or steps
How to Apply
- Prepare a sound base: the wall needs to be firm, levelled, clean and dry; fill cracks, level any variation greater than 2mm and keep moisture under 2%.
- Adhesive choice: fix porcelain with C2 cementitious adhesive as Dune advises, after testing with at least two tiles.
- Spread and bed: go from the floor upward, spreading a thin 3mm layer notched with a no. 3 trowel, seating tiles before the adhesive skins over. No dot fixing.
- Align the pre-cuts: make the joint between tiles the same width as the pre-cuts, never below 2mm (3mm on plasterboard), with self levelling spacers and offsets under 25%.
- Grout completely: fill grooves and joints fully, choose epoxy grout around water, and clean excess with a wet sponge, avoiding abrasives.
Colour and Finish
Bright white grout gives a soft, seamless wall; grey grout picks out every groove. Snow is graded V1 for shade variation, the most even of the seven gloss colours, with 6 faces and an irregular texture.
The Kit-Kat gloss line also includes Ivory, Musgo, Water, Ocean, Grass and Noche, and there is a matt line in White, Grey, Anise Green, Sky and Lilac.
Important Notes
- Shade can differ from batch to batch; order your full requirement in one purchase from one batch.
- Technical results are as published by Dune on the Snow Gloss datasheet, dated 15-09-2026.
- Check each box for colour and finish before fixing, as Dune does not accept claims on installed tiles.
- Dune warns that small pores may sit in the grooves of pre-cut models; full grouting hides them from view.
- No slip result is listed and floor uses are marked NO, so keep Snow Gloss off floors.
Frequently Asked Questions
Is Dune Kit Kat a real mosaic or a tile?
It is a tile. Each Kit Kat piece is 115x231mm porcelain with pre-cuts that create the finger mosaic effect once grouted.
Is Kit Kat Snow Gloss fluted?
Snow Gloss has a finger relief with pre-cuts that Dune says must be fully grouted, so it reads as a finger mosaic.
How many tiles are in a box of Kit Kat Snow Gloss?
Every box has 24 tiles and covers 0.64 m², weighing 10.94 kg.
